脱硫工艺课件.pptVIP

FGD 控制系统 需控制的常用工艺参数: SO2 排放 石灰石吸收剂给料 循环浆液 pH 密度 ME 冲洗 槽液位 典型 FGD 控制室 FGD 控制系统(续) 常用工艺仪表: SO2 监测仪 pH 计 密度计 液位计 流量计 压力探头 槽液位探头 典型 FGD 控制室 The flue gas around an FGD system can be either wet or dry, and can range in temperature from about 55 to 160 degrees C. As a result, the duct work is exposed to a variety of environments, some of which can be very corrosive. Careful selection of materials for ductwork is critical. In a typical reagent preparation system, limestone that will be used for the day is sent to the ball mill for grinding. Water is added at this point to make a slurry. The groun