CycloneV器件中收发器定制配置.PDFVIP

Cyclone V 器件中收发器定制配置 5 2013.05.06 CV-53005 订阅 反馈 与FPGA架构的集成，全双工收发器通道支持具有物理介质附加子层(PMA)和物理编码子层(PCS)的 定制配置。 可以通过下面的其中一种配置来定制收发器： • 标准PCS—物理编码子层(PCS)和物理介质附加子层(PMA) • 低延迟模式中的标准PCS—低延迟PCS和PMA 图5-1: 定制配置选项 高达5 Gbps 的PCS (标准PCS和低延迟模式) - 5 Gbps通道可用于GT和ST器件种类中 tx_serial_data HIP PIPE PCS PMA rx_serial_data FPGA Fabric Transceiver Resources Serial Interface 相关链接 Cyclone V器件手册: 已知问题 列出了对Cyclone V器件手册章节规划的更新。 标准PCS配置 在这种配置中，可以定制收发器通道以包括应用所需功能的PMA和PCS 。收发器通道通过PCS连接 FPGA架构。 © 2013 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as trademarks or service marks are the property of their respective holders as described at ISO /common/legal.html. Altera warrants performance of its semiconductor products to current specifications in accordance with 9001:2008 Alteras standard warranty, but reserves the right to make changes to any products and services at any time without notice. Altera assumes Registered no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in writing by Altera. Altera customer