车身覆盖件快速模具及原型制作工艺研究.pdfVIP

上半月出版 Casting Forging Welding 金属铸锻焊技术 车身覆盖件快速模具及原型制作工艺研究 侯红玲 渊陕西理工学院机械工程学院袁陕西汉中 723003冤 摘 要 对车身覆盖件模具的传统制造和快速制模工艺进行了分析比较袁 介绍了热喷涂技术在模具制造中的应 用遥通过试验总结出快速模具制作中的原型制作工艺和模具制作工艺遥针对石膏加工特性袁进行了石膏原型的数控加工 和后期的修补实验及热喷涂快速模具制造过程试验袁得到了工程中车身覆盖件模具的制作工艺袁将该方法应用到某车 身覆盖件模具的制造中袁取得了较好的效果袁为新车型的开发提供了支撑和依据遥 关键词 快速模具曰原型曰工艺流程 中图分类号 TG3 15.2 文献标识码 A 文章编号 Study on Process of Prototype and Rapid Model of Autobody Panel HOU HongLing (Shaanxi University of technology, Hanzhong 723003, China) Abstract 院 Compared with rapid mold process of the autobody panel and traditional manufacturing method in the paper, the electric arcs spraying technology was introduced in rapid mold process application. Prototype and mold process were received by experiment. The methods were achieved to manufacture plaster model process and its later patch by testing, and spray fast mould production course was tested, the results have reached the practical feasible technology scheme; the method was applied to certain autobody panel rapid mold and has gotten better effect. As a result, the method offered the support and basis to the development of new vehicle type. Key words 院rapid metal tooling; prototype; process 为了满足市场需求袁汽车频繁换型袁而许多新车 如德国KARMANN 公司采用锌基合金和树脂模具 型往往是在底盘不变的情况下局部修改完善车身而 制造方法袁 使大型覆盖件模具的制造周期缩短 获得遥 因此袁 汽车车身覆盖件及其模具的开发已成 6 8 周曰美国Dies and Manufacturing 公司采用铝合 [1] 汽车工业发展的重点和关键 遥 金CNC 加工制造实验模具袁使大型板料冲压模具开 汽