单机Openstack.docVIP

基本工具 安装gedit工具，方便之后的复制等工作，要是熟悉vi也可以不安装 安装vncviewer。因为当时安装的时候选择最小桌面安装，所以没有自带的vnc工具，查看了完整的桌面安装，使用的是TigerVNC 同样，之后需要制作镜像，所以镜像在U盘中，就需要安装ntfs格式支持 假如不行，可尝试： 1、下载rpmforge的rpm文件包 32位系统 [root@linuxsight linuxsight]#??wget /rpmforge-release/rpmforge-release-0.5.2-1.el6.rf.i686.rpm 64位系统 [root@linuxsight linuxsight]#??wget /rpmforge-release/rpmforge-release-0.5.2-2.el6.rf.x86_64.rpm 2、安装rpmforge的rpm文件包 [root@linuxsight linuxsight]#??rpm -ivh?rpmforge-release-0.5.2-1.el6.rf.i686.rpm（目录请对应，区分32和64，这里是32位） 3、安装ntfs-3g 参考：/a381243429/item/a6a218de222116 ? ? 先配置网络： 我的本机网路是0，最好是手动分配IP 子节点是1 2 几种方式配置都可以 1：sudo setup 2：vi /etc/sysconfig/network-scripts/ifcfg-eth0; 3：网络编辑器 ? 运行?service network restart ? 进入主题： 正式安装openstack: ? sudo yum install -y?/rdo-release.rpm ? sudo yum install -y openstack-packstack ? 在执行第三步之前，可以使用这个命令，用于产生answer-file，这样就可以按照自己的需要修改password等。 packstack?--gen-answer-file ? packstack --allinone ? 中间出现断网情况的话，新建terminal，直接sudo service network restart ? 中间假如安装失败：If you have run packstack previously, there will be a file in your home directory named something like packstack-answers153728.txt You will probably want to use that file again, using the --answer-file option, so that any passwords youve already set (eg, mysql) will be reused. ? 配置网络： 1：删除所有的原有配置网络 2：After completion, given a single machine with a current IP of 12/24 via DHCP with gateway of :Make /etc/sysconfig/network-scripts/ifcfg-br-ex resemble: (note this file shouldnt exist, but does due to a bug)DEVICE=br-exDEVICETYPE=ovsTYPE=OVSBridgeBOOTPROTO=staticIPADDR=12 # Old eth0 IP since we want the network restart to not kill the connection, otherwise pick something outside your dhcp rangeNETMASK= # your netmaskGATEWAY= # your gatewayDNS1= # your nameserverONBOOT=yes ? 3：Make /etc/sysconfig/network-scripts/ifcfg-eth0 resemble (no BOOTPROTO!):DEVICE=eth0HWADDR=52:54:00:92:05:AE # your hwaddrTYPE=OVSPortDEVICETYPE=ovsOVS_BRIDGE=br-exONBOOT=yes ? 4：Add to the /etc/neutron/plugin.