用于公差设计的加权公差–成本模型研究.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2014, 3, 131-137 Published Online December 2014 in Hans. /journal/met /10.12677/met.2014.34017 Study on Weighted Tolerance-Cost Model for Tolerance Allocation Xinyou Li, Yin Xu, Zhanbing Xiong, Zhibo Zhang, Qingbin Zhao Tianjin Long March Launch Vehicle Manufacturing Co. Ltd., Tianjin Email: lixinyou2000@163.com, Tiger425@163.com, xiongzhanbing@126.com, 531135089@, zhaoqingbin9@163.com th th th Received: Sep. 16 , 2014; revised: Oct. 20 , 2014; accepted: Oct. 27 , 2014 Copyright © 2014 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Abstract To establish a precise and unifying tolerance-cost model, the method of introducing weighted coefficient was proposed. Tolerance-cost curve was divided into three parts according to the curve’s feature. Weighted tolerance-cost model was established based on Exponential model, Re- ciprocal powers model and Cubic polynomial after analyzing the trend of every part, respectively. The proposed method was verified with experimental data, and the result indicated that: Weighted tolerance-cost model is more precise than other models with error reduction by 80%. The proposed method is applied to other frequently-used processing mode, and is easy to pro- gram. Keywords Tolerance-Cost Model, Basis Function, Weighted, Curve 用于公差设计的加权公差–成本模型研究 李新友，徐 寅，熊占兵，张志博，赵庆斌 天津航天长征火箭制造有限公司，天津 Email: lixinyou2000@163.com, Tiger425@163.com, xiongzhanbing@126.com, 531135089@, zhaoqingbin9@163.com 收稿日期：2014年9月16 日；修回日期：2014年10月20