RPLC项目检查和测试程序.doc

Inspection and Test Procedure for Construction of RPLC Project RPLC项目检查和测试程序 DOC. No.: F074-PI-0310-0001 Revision Status: C 18-07-13 Issue for Approval B 28-05-13 Issue for Approval A 17-04-13 Issue for Approval Rev. Date Description Prepared By Checked By Approved By HYUNDAI-WISON Client Qin Yong Shi Xiangquan Zhang Shouyue Table of Contents 1 INTRODUCTION简介 3 1.1 Purpose 3 1.2 Scope 3 1.3 Definitions and Abbreviations 3 2 PROCESS 5 3 GENERAL NOTICE 5 4 OVERVIEW 7 5 STEEL STRUCTURE 9 6 PAINTING, BLASTING, GALVENIZING 14 7 PIPING 17 8 EQUIPMENT 27 9 ELECTRICAL 29 10 INSTRUMENT 29 11 WEIGHTING 30 12 LOAD OUT 30 13 DELIVERY 31 INTRODUCTION简介 This document presents the Wison (Nantong) Heavy Industry (BUILDER) Project Fabrication Inspection and Test Plan (ITP) for the module of RPLC Deep Conversion Project. 本程序介绍的是惠生重工RPLC项目的关于生产检查和试验计划。 The ITP is prepared and managed by the Project Quality Assurance Manager in accordance with the Project Specifications.本程序是项目质量保证经理根据项目的特殊说明而啊指定的。 Purpose目的 To describe the inspection and test items during the project construction period and define the “Hold point”or “Witness point”or “Review Point”or “Surveillance Point” to ensure that the quality of each product item can meet the requirement of contract, specifications and drawings. This Inspection Test Plan (ITP) shall be issued for HIWIN (CONTRACTOR) and/or PDVSA (COMPANY) approval as required.本程序是在项目施工期间，为了描述检查和测试项目以及定义“节点控制”或者“见证点”、“检查点”、“监测点”来确保产品质量满足合同需要，满足图纸的说明。此ITP程序文件必须经过HWIN和PDVSA的批准。 Scope前景展望 This ITP covers all BUILDER Fabrication yard inspection and test items for the piperack module of RPLC Deep Conversion Project. The ITP must ensure compliance with the requirements of Production drawings, specifications, contract and relevant standards. 此ITP包含RPLC项目部管廊模块所有预制厂房的检查和测试项目。此ITP必须确保遵守生产图纸，说明以及合同相关标准的需要。 Definitions and Abbreviations 定义和缩写代码 Definitions定义 The following definitions apply to this Project I