IEC61968论文：基于IEC61968的配电网应用软件的互操作研究.docVIP

IEC61968论文：基于IEC61968的配电网应用软件的互操作研究 【中文摘要】信息集成作为智能电网的一个重要特征,成为电力系统研究的一个热点问题。早期由于我国电力行业缺少统一的标准规范,各个电力企业应用建立时只考虑单一应用,出现了“信息孤岛”的问题。互操作主要出发点是电力系统信息集成与共享,对模型、消息的一致性以及相关应用的互通性进行研究。国际电工委员会制定了IEC61970/61968标准,提出了CIM作为电力系统的标准数据模型。本文基于IEC61968标准研究了配电网的高级应用的互操作。选取潮流计算业务场景做分析,根据其业务需求定义信息交互子集CIM/Profile,并基于IEC61968标准制定消息类型规范XSD,探讨了基于IEC61968信息总线的软件互操作流程,实现基于XSD语法格式的消息传递。分布式电源(DG)并网后,配电网由单电源变为多电源。基于IEC61968标准,进一步设计了分布式电源的消息类型规范XSD,并且研究了如何应用消息中的分布式电源信息得到等效计算模型;最后基于IEC61968信息交互总线,采用含分布式电源信息的消息传递的方式实现了计算软件DigSilent的应用集成,采用DigSilent实现含DG的潮流计算。选取68节点实际配网算例,实现了信息平台内部潮流计算软件与专业计算软件BPA、DigSilent的互操作,通过计算结果的比对验证了互操作的可行性和正确性。 【英文摘要】As an important feature of smart grid, Information integration has become a hot issue in the studies of power system. Due to lack of uniform standards in China抯 power industry, the electric power enterprises face the problem of “information silos” , which the application system can only meet a single demand. The major point of interoperability for the power system is the study on the consistency understanding of information integration and sharing on the message and the model and on the application interoperability. The International Electrotechnical Commission develops IEC61970/61968 and proposals CIM as the standard data model of power systems .Based on IEC61968, the paper study on the interoperability of advanced application in distribution network.Take the power flow as the business analysis scene, a subset of exchange information CIM / Profile based on their business requirements and the XSD specification of message type based on IEC61968 standards are defined. The paper discusses the interoperation抯 flow based on IEC61968 information bus and carrys out the message pass complying XSD syntax. With the DG (Distributed Generation) connected into the distribution network,it has multiple power sources. Based on IEC61968 standard, the XSD specification of message type for distribution generation is designed, which can get the equivalent model of the DG from data