Cisco 2950-24 命令集(中英对照).docx

Cisco 2950-24 Switch命令集用户模式下：connect Open a terminal connection 打开一个终端连接disable Turn off privileged commands 关闭特权命令disconnect Disconnect an existing network connection 断开现有的网络连接enable Turn on privileged commands 打开特权指令exit Exit from the EXEC从执行退出logout Exit from the EXEC从执行退出ping Send echo messages发送回应消息resume Resume an active network connection恢复一个活动的网络连接show Show running system information显示系统运行信息telnet Open a telnet connection打开telnet连接terminal Set terminal line parameters设置终端线参数traceroute Trace route to destination跟踪路由到目的地Cisco 2950-24 Switch命令集特权模式下：clear Reset functions复位功能clock Manage the system clock管理系统时钟configure Enter configuration mode进入配置模式connect Open a terminal connection打开一个终端连接copy Copy from one file to another从一个文件复制到另一个debug Debugging functions (see also undebug)调试功能（参见“undebug”）delete Delete a file删除一个文件dir List files on a filesystem在文件系统中的文件列表disable Turn off privileged commands关闭特权命令disconnect Disconnect an existing network connection断开现有的网络连接enable Turn on privileged commands打开特权指令erase Erase a filesystem删除一个文件系统exit Exit from the EXEC从执行退出logout Exit from the EXEC从执行退出more Display the contents of a file显示一个文件的内容no Disable debugging informations禁用调试信息ping Send echo messages发送回应消息reload Halt and perform a cold restart停止执行冷启动resume Resume an active network connection恢复一个活动的网络连接Cisco 2950-24 Switch命令集特权模式下：setup Run the SETUP command facility运行安装命令设备show Show running system information显示系统运行信息ssh Open a secure shell client connection打开外壳客户端连接telnet Open a telnet connection打开telnet连接terminal Set terminal line parameters设置终端线参数traceroute Trace route to destination跟踪路由到目的地undebug Disable debugging functions (see also debug)禁用调试功能（参见“调试”）vlan Configure VLAN parameters配置VLAN参数write Write running configuration to memory, network, or terminal写的运行配置内存、网络或终端全局配置模式下：access-list Add an access list entry访问列表添加一个条目banner Define a login banner定义一个登录的旗帜boot Boot Commands启动命令cdp Global CDP confi