机采棉精播机关键部件运动仿真及有限元分析.docVIP

机采棉精播机关键部件运动仿真及有限元分析 孙冬霞 李明军 石磊 宫建勋 张爱民 滨州市农业机械化科学研究所 农业部南京农业机械化研究所 X 关注成功！ 加关注后您将方便地在 我的关注中得到本文献的被引频次变化的通知！ 新浪微博 腾讯微博 人人网 开心网 豆瓣网 网易微博 摘????要： 为了满足棉花生产全程机械化的要求, 项目组研发了适用于在耕整后田地上作业的2BMJ-3A型基于机采棉的智能精量播种机。为此, 对2BMJ-3A型基于机采棉的智能精量播种机的结构和工作原理进行了介绍, 利用三维设计软件Solid Works和机械系统动力学分析软件ADAMS对播种机的仿形播种机构进行了运动学仿真, 并利用Solid Works中的Simulation模块对播种开沟器进行了有限元分析。结果表明:在耕整后的田地上, 播种机仿形播种机构的仿形能力能够满足棉花播种的要求, 播种开沟器在工作状态时不会产生屈服现象, 能够满足棉花播种的使用要求。 关键词： 播种机; 仿形播种机构; 机采棉; 运动学仿真; 有限元分析; 作者简介：孙冬霞 (1981-) , 女, 山东寿光人, 副研究员, 硕士, (E-mail) bznjsdx@163.com。 作者简介：石磊 (1963-) , 男, 西安人, 研究员, 硕士生导师, (E-mail) shileijsnj@126.com。 收稿日期：2017-02-14 基金：山东省重点研发计划项目 (2015GNC112007) Motion Simulation and Mechanical Analysis of Key Components of Machine-picking Cotton Sun Dongxia Li Mingjun Shi Lei Gong Jianxun Zhang Aimin Binzhou Agricultural Machinery Research Institute; Nanjing Research Institute for Agricultural Mechanization, Ministry of Agriculture; Abstract： In order to meet the full mechanization of cotton production requirements, the project team developed for the field after the tillage in the work of 2BMJ-3A-based intelligent machine precision cotton seeding machine. In this paper, the structure and working principle of 2BMJ-3A intelligent precision planter based on machine-picked cotton are introduced. The kinematics simulation of the planter seeding mechanism of the seeder was carried out by using the 3D design software Solid Works and the mechanical system dynamic analysis software ADAMS. The simulation of the seeding opener was carried out by using the Simulation module in Solid Works. The results showed that the profiling ability of the planer sowing mechanism of the planter could meet the requirement of cotton seeding in the field after tillage, and the sowing device could not produce yield in the working state and meet the requirement of cotton planting. Keyword： planter; planing sowing mechanism; machine picking cotton; kinematics simulation; finite element analysis; Received： 2017-