粉末冶金不锈钢专题讲座PPT.pdfVIP

P/M Stainless steels – for Components 粉末冶金不锈钢 | Outline —摘要 Introduction of PM stainless steel 粉末冶金不锈钢概述 Processing 生产工艺 Factors affecting corrosion resistance of PM S.S. 影响粉末冶金不锈钢抗腐蚀性能的因素 Tech center support 技术中心的技术支持 2 | 2010-3-30 PM stainless steel —粉末冶金不锈钢 1. PM technology - Net shape processing and more efficient material utilization! 粉末冶金技术– 近净成型工艺、更有效的材料利用率 2. In stainless steel PM you want corrosion resistance! 采用粉末冶金不锈钢可以获得抗腐蚀性能！ 3 | 2010-3-30 Powder is key!—粉末是关键 It is possible to produce P/M parts that will equal wrought stainless steel parts in corrosion resistance. 粉末冶金生产的不锈钢零件可以具有和锻制不锈钢零件 相当的抗腐蚀性能。 It is necessary to carefully control sintering parameters. 严格控制烧结条件非常重要。 Loss of corrosion resistance in P/M stainless steels is mainly due to formation, during sintering, of oxides, nitrides and carbides. 烧结过程中形成的氧化物、氮化物、碳化物会降低粉末 冶金不锈钢的抗腐蚀性能。 4 | 2010-3-30 Stainless Steel Grades —常用不锈钢牌号 •304L: Basic Austenitic Grade — 基础奥氏体不锈钢 Most economical of austenitic grades. 最经济的奥氏体不锈钢 304LSC. Enhanced Corrosion Resistance — 提高了抗腐蚀性能 This is a tin-modified version of 304L alloy having all the characteristics of 304L, except for improved corrosion resistance while sintered at 1120 °C. 在304L的基础上加入Sn，拥有304L所有性能，并且提高了1120℃烧结的抗腐蚀性能。 •410: Martensitic Grade — 马氏体不锈钢 The martensitic form has the lowest corrosion resistance of all P/M stainless steel grades. Low cost. 马氏体不锈钢是所有粉末冶金不锈钢中抗腐蚀性能最低的，但成本低。 316L: Austenitic Grade —奥氏体不锈钢 This alloy offers better corrosion resistance and machinability than 304L. With careful processing it can meet the corrosion resistance requirements of the more demanding applications. 拥有比304L更好的抗腐蚀性能和机加工性能。生产控制得当，其抗腐蚀性能可以达到更高的要求。 5 | 2010-3-30 What are stainless steels— 不锈钢的定义 • I