基于性能设计方法的钢筋混凝土柱构件分析-中南大学学报.pdfVIP

41 4 ( ) Vol.41 No.4 2010 8 Journal of Central South University (Science and Technology) Aug. 2010 1 1, 2 1, 2 (1. 510640 2. 510640) ABAQUS − ABAQUS − − − TU375 A 1672−7207(2010)04−1584−06 Analyses of reinforced concrete columns by performance-based design method 1 1, 2 1, 2 WAN Hai-tao , HAN Xiao-lei , JI Jing (1. School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China; 2. State Key Laboratory of Subtropical Building Science, South China University of Technology, Guangzhou 510640, China) Abstract: The software ABAQUS was used to perform the finite element simulation of a group of reinforced concrete column tests, the material constitutive of concrete and reinforcement were set up in simulation. The load−displacement skeleton curves of the columns were obtained after the completion of the simulation. Test results and simulation results were compared. Then, the software ABAQUS was also used to simulate different types of reinforced concrete frame columns, and load−displacement skeleton curves or moment−rotation curves of the columns were obtained. Referenced to the performance-based design method, the curves were classified according to different factors. The performance parameters of co