arcengine下tin的三维显示 c#代码.docVIP

ArcEngine+C# TIN相关三维功能模块介绍（一） 1.TIN数据的加载 //下面代码是打开 E:data 文件夹下名称为 tin 的 TIN数据。 //定位TIN数据 IWorkspaceFactory pWSFact = new TinWorkspaceFactoryClass(); IWorkspace pWS = pWSFact.OpenFromFile(@E:data, 0); ITinWorkspace pTinWS = pWS as ITinWorkspace; ITin pTin = pTinWS.OpenTin(tin); //将TIN变为TIN图层 ITinLayer pTinLayer = new TinLayerClass(); pTinLayer.Dataset = pTin; pTinLayer.Name = TIN; //用三维控件AxSceneControl加载（也可以用AxMapControl，但看到了只能是平面效果） this.axSceneControl1.Scene.AddLayer(pTinLayer, true); 2.TIN图层属性设置 这里介绍TIN模型Z轴缩放、沿Z轴上下偏移以及TIN的平面显示与三维显示之间的切换。其效果与在ArcScene中右击TIN图层，点击属性下设置Z unit conversion factor和Base Heights的效果一样。主要用到了访问三维数据属性的接口I3DProperties，这段代码也比较简单，相信大家稍微看一下就能明白，对应的功能可以复制后直接使用。 /// summary /// 获取TIN图层三维属性 /// /summary /// param name=pTinLayerTIN图层/param /// returns/returns public I3DProperties get3DProps(ITinLayer pTinLayer) { I3DProperties p3DProps = null; ILayerExtensions lyrExt = pTinLayer as ILayerExtensions; for (int i = 0; i lyrExt.ExtensionCount; i++) { if (lyrExt.get_Extension(i) is I3DProperties) { p3DProps = lyrExt.get_Extension(i) as I3DProperties; } } return p3DProps; } /// summary /// TIN模型Z轴缩放，设置缩放因子,此函数要位于控件加载TIN图层事件后 /// /summary /// param name=pTinLayerTIN图层/param /// param name=ZFactor缩放因子：0-1缩小；1不变；1拉伸/param public void SetTinLayerZFactor(ITinLayer pTinLayer, double ZFactor) { I3DProperties p3DProps = get3DProps(pTinLayer); if (p3DProps != null) { p3DProps.ZFactor = ZFactor;//设置高程缩放因子 p3DProps.Apply3DProperties(pTinLayer); } } /// summary /// TIN模型整体上下偏移 /// /summary /// param name=pTinLayerTIN图层/param /// param name=offset偏移量：正数向上偏移；负数向下偏移/param public void SetTinLayerOffset(ITinLayer pTinLayer, double offset) { I3DProperties p3DProps = get3DProps(pTinLayer); if (p3DProps != null) { p3DProps.OffsetExpressionString = offset.ToString(); p3DProps.Apply3DProperties(pTinLayer); } } /// summary ///将TIN变为一个平面，并设置该平面的高程 /// /summary /// param name=pTinLayerTIN图层/param /// param name=tinHeight平面的高程/param public void SetTinLayerHeight(ITinLayer pTinLayer,