NetApp备份容灾系统方案交流.pptVIP

* * A big DBA challenge is balancing BU/recovery,?performance and space management. In some studies, work in these areas adds up to 50% of their time. NetApp Snapshot makes it?simple. It alleviates the pain points we highlighted in the earlier slides regarding backup and recovery. NetApp allows the DBA to take backups more often as there is no performance or storage overhead. Given that we can store up to 255 snapshot copies, Snapshot can be taken every hour or less if needed * * Goal of Slide: Explain the use of large capacity SATA drives in enterprise application Key Messages: 144GB FC drives vs 1TB SATA drives equals a 7X capacity improvement Because SATA drives store much more data per disk drive, resiliency is very important. RAID-DP provides this resiliency, but without the capacity overhead of disk mirroring Our new Performance Acceleration Module (PAM) can effectively increase the read performance of SATA drives, allowing their use in more applications The combination of SATA, RAID-DP, and PAM are the beginnings of a paradigm shift as to what constitutes “high performance” storage Storage Efficiency * Slide Objective: Demonstrate the ability to combine PAM II with SATA disk drives under a file services workload to reduce costs without compromising performance. We tested PAM II with SATA disk drives under an industry standard, file services workload (SPECsfs2008_nfs) to demonstrate that you can achieve performance comparable to a configuration with Fibre Channel disk drives while reducing the purchase price and operating cost of the storage system. The system under test was a dual-controller (active-active HA) FAS3160A storage system. First we tested it with just high performance Fibre Channel disk drives in the configuration. That gave us a performance baseline. The we added a 256GB PAM II module to each controller and replace the high performance Fibre Channel disk drives with half as many SATA drives in four of our new DS4243 disk she