毕业设计（论文）—三角转子缸体型面加工设计.doc

重庆科技学院 毕业设计（论文） 题 目 院 （系） 专业班级 学生姓名 学号 指导教师 职称 评阅教师 职称 2011年月日学生毕业设计（论文）原创性声明本人以信誉声明：所呈交的毕业设计（论文）是在导师的指导下进行的设计（研究）工作及取得的成果，设计（论文）中引用他（她）人的文献、数据、图件、资料均已明确标注出，论文中的结论和结果为本人独立完成，不包含他人成果及为获得重庆科技学院学位或证书而使用其材料。与我一同工作的同志对本设计（研究）所做的任何贡献均已在论文中作了明确的说明并表示了谢意。 毕业设计（论文）作者（签字）： 年 月 日 ABSTRACT Cylinder type the manufacturing is the key process machining, the machining accuracy directly affecting engine working performance and long service life. And its precision and roughness requirements, and its processing is strict in rotor machine parts processing is the most complex, is in a process when the most consumption, which cannot be in ordinary machine processing, therefore must design manufacturing tooling/fixture or special machine tool to complete the process. This paper introduces the working principle of rotor engine, and the cylinder profile of gen into includes rolling round and fixed round the diagnosis and cutting inside and outside with fixed round roll round cut gen nanocomposites, emphatically analyses the cylinder envelope type 1ta series processing; Expounded the processing method of grinding cylinder type - gen nanocomposites, modeling method and then modeling method into, and its corresponding processing principle is discussed, and the analysis of the advantages and disadvantages. Draw the corresponding processing method principle chart, and narrative machining process. Keywords: Gen nanocomposites Gen into modeling method Modeling method Cylinder type surface Machining process  目 录 摘要 I ABSTRACT II 绪 论 3 1 转子发动机的结构和工作原理 4 2气缸的理论型线 7 2.1气缸型线的创成 7 2.2 滚动圆与固定圆的内切创成法 9 2.3 滚动圆与固定圆外切创成法 11 2.4气缸的实际型线 12 3汽缸型面的镗面加工 15 3.1刀具的几何角度 15 3.2 镗削气缸实际型面的工装夹具 16 3.3 多刀加工气缸型面 18 4 用创成法磨削汽缸型面 20 4.1用外切齿轮机构创成法 20 4.2用速比与内切齿轮机构相当的机构创成法 22 5 用靠模