涡旋压缩机用磷化膜磨损性能研讨.pdfVIP

涡旋压缩机用磷化膜磨损性能研究 徐忠辉，闫伟国．刘辰皆，曲洪伟．赵之海 (人连二洋瓜缩机有限公司，辽宁大连116033) 摘要针对涡旋批缩机用磷化膜的摩擦磨拭问题，通过磨损与咬合实验，T斗助扫描『乜镜对磷化膜的磨损性能及磨损机 理进行-r研究；州时t对涡旋压缩机进行耐久试验以验证磨损与咬合试验结果的可靠性，为进一步提高磷化膜的耐磨性提 供理论依据，并提}n相心的改进措施。结果表恻，l{=i米磷化涡旋相比，磷化涡旋的相对磨损量和摩擦系数均降低了约60 ％；发生咬合所需的时间和载荷均提z蛊i丫约60％；磷化涡旋不易产生咬台失效。 关键词耐磨性，磨损机理，锰磷化膜，雕缩机 WearResistanceofthe Film UsedinScroll Phosphorizing Compressor Xu Zhihui，Yah Zhihai Weiguo，LiuChenjie，QuHongwei，Zhao (Dalian SanyoCompressorCorporationofLimited，Dalian116033) AbstractThefriclionandwear resistanceof filmusedinscroll hasbeenresearchedwith nhosphorizing compressor wearing, and ordertoofferthe agglutinationexperiment．and lheoreticalevidencefortbewearrasistancoof enduringexperiment,in filmandadvance the been phosphorizing corresponding to theWeer improvementmethods(SEM)hasadoptedanalyze haveindicatedthattherelative mechanism，conclusions andMnioncoefficientofthe scrollhas wearingcapacity phosphorizing the beenlower60％than timeandforce unphosphorizingscrollls，the ofthe scrollhasincreased600 agglutination phosphorizing thanthe scroll’s，andthe scrollhasbeenhardertooccur failure． unphosphorizingphosphorizing agglutination WordsWear Film Key Resistance，Wear Mechanism，Phosphor