感应式磁声耦合成像脉冲磁场激励源的设计.PDFVIP

·18· THESIS RESEARCH REPORT 研究论著 感应式磁声耦合成像脉冲磁场激励源的设计 张顺起，刘志朋，靳静娜，李 颖，殷 涛 摘要 目的：脉冲磁场激励源是感应式磁声耦合成像系统激发声振动信号的关键部分，为了提高成像质量及成像分 [ ] 辨率，对脉冲磁场激励源进行参数设计及模拟实验验证。方法：选用正弦脉冲作为激励信号，对脉冲磁场放电电路参数 进行了仿真设计，通过实验测量磁激励线圈产生的空间磁场信号，验证仿真结果。 结果：实验结果表明，利用正弦脉冲 对设计制作的线圈进行放电，磁感应强度信号中心频率为0.8 MHz ，频带宽度为 1.2 MHz，此参数下成像分辨率理论上 可达 1.9 mm，脉宽达 1.27 μs 。 结论：利用设计的脉冲磁场激励源参数，通过功率放大即可实现感应式磁生耦合成像系 统的脉冲磁场激励。 关键词 脉冲磁场；激励源；磁声耦合成像；分辨率 [ ] 中国图书资料分类号 ； 文献标识码 文章编号 （ ） [ ] R318 O441．3 [ ] A [ ] 1003-8868 2010 09-0018-04 Design of Exciting Source for Pulsed Magnetic Field Used in MAT-MI System ZHANG Shun-qi, LIU Zhi-peng, JIN Jing-na, LI Ying, YIN Tao （Chinese Academy of Medical Sciences; Institute of Biomedical Engineering, Peking Union Medical College, Tianjin 300191, China ） Abstract Objective To carry out parameter design and simulation experiment for the exciting source of the pulsed magnetic field so as to improve the imaging quality and resolution by the MAT-MI system. Methods The sinusoidal pulse was adopted to generate exciting pulse and the parameter of the discharging circuit of the magnetic generator was simulated. Experiment was carried out to validate the simulation results. Results Experiments showed that the centre frequency of the inducted magnetic pulse was 0.8MHz, the bandwidth 1.2 MHz and the pulse width 1.27 μs. Conclusion Using the designed parameters of the pulsed magnetic field, the MAT-MI system can be excited through power amplification. [Chinese Medical ， ， （ ）： Equip