裁断加工作业流程简介.pptVIP

S * 裁斷加工作業流程 A report on CDT裁斷加工 裁管流程示意思圖 派工 接派工單 資材領料 核對指令 配套 高周波 裁斷 準備 裁二次(部分) 臺版 送往 下一 流程 一、裁斷操作基本知識 1、裁斷干部應具備的素質: a.良好的裁斷專業知識 b.較強的成本、品質觀念。 2、裁斷操作的注意事項: 1)裁斷機的種類:搖臂式 油壓式 2)斬刀的種類:普通刀料 厚料刀 3、具本操作方式:(一人一機) 1)設定刀模 2)操作總標準工作。 a.核對樣品鞋與材質。 b.將原材料按規定標準準備。 c.按派工單指令所示拿取刀模,然後按指令SIZE明細生產 d.操作中絕對不允許兩個(以上)人同時操作。手未離開刀 模絕不可以按開關。 4、裁料大致分四類: 1)牛皮類 2)PU類 3)網佈類 4)副料類 皮料質地分佈 1 2 3 4 4 4 4 5 5 1.背部:質地最好.用在 鞋頭/鞋翅內外腰. 2.肩部:質地稍差.用在 鞋頭/鞋翅內外腰. 3.頭部:質地差.用在下鞋翅 及有鉓片掩蓋及幫腳 4.四蹄:質地差.用在助帶及 有鉓片掩蓋及幫腳. 5.腹部:質地差.用在助帶及 有鉓片掩蓋及幫腳. 皮料延申方向 1 2 3 4 4 4 4 5 5 箭頭尖所指 方向為用拉 拉就可以伸 展的方向.簡 稱為延申方 向. Cutting Techniques CUTTING DEPARTMENT - LEATHER Half skin start on the left shank, pass through the butt to the right shank. Cutting dies have to be placed as close as possible to avoid excessive waste. Sample of the shoes should be provided to cutter, for him to know what grain fault could be added to the upper that could be covered. Cut the large sizes from the largest skin. Save skins with many defect for small sizes. Lift the cutting dies, do not drag them across the leather as they could scratch it. Ensure that suede’s patterned and shaded leather are match up. Place cut components on the bench so as to avoid damaged and put knives on the flesh side of stacked component. Operator should feel the stretch direction before cutting. Leather Cutting Method CUTTING DEPARTMENT - LEATHER CUTTING DEPARTMENT - LEATHER Leather Inspection Table Prior to cutting, leathers should be inspected carefully for inconsistencies. Above is sample of a leather inspection table. Usually composed of a clean, flat table, leather hanger and with enough lighting provided. CUTTING DEPARTMENT – CUTTING EQUIPMENT Bridge-Type Cutting Machine SOP Cutting Specs Leather hanger Cutting die storage rack Very effective despite cutting a number of layers of materials. In addition, and to assist each operator to a more efficient and productive o