带式输送机转动毕业设计.doc

摘 要 带式输送机是输送能力最大的连续输送机械之一，它的运输能力和输送距离是所有其他输送机设备无法比拟的。输送带结构简单，运行平稳，运转可靠，能耗低，对环境污染小，便于集中控制和实现自动化，管理维护方便，在连续装载条件下可实现连续运输，尤其是长距离，高速度和大运量的输送机已是运输成件货物与散状物料的理想工具。 本课题是结合实际工程问题而制订出的一个题目，其目的是设计一套能够在给定场合下安全可靠运行的起伏带式输送机系统，具有重要的 现实意义。 本文是对通用设备（DTⅡ系列通用固定带式输送机）的选型计算，需要通过计算选择各组成部件。最后组合成使用于陶二煤矿改建的上运带式输送机。 本文概述了常用带式输送机类型和特点，国内外带式输送机的发展现状及差距，指出了带式输送机最新的发展方向。通过系统的动态建模计算和仿真分析，将静态设计结论和动态分析结果相结合，指出长距离上运带式输送机起动运行过程中存在的问题，并提出可行的控制理论和解决方案。 本文通过对输送机各部件的选型计算和某些重要部件的设计以使整个系统能够在给定场合下安全可靠的完成预期的任务。 关键词：上运带式输送机；拉紧装置；选型设计 ABSTRACT The belt conveyors are transport machines which are one of the biggest capacity transports in a row. All other transport machine equipments cant compare to its in the conveyance ability and transport distance. And its simple structure, circulate balance, revolve credibility, consume low, small pollution of the environment, easy concentration control, realization automate and manage maintenance convenience, it can carry out continuous conveyance in the continuous load condition, particularly long distance, the transport of high speed and big carrying capacity machine is already the ideal tool which transports a piece goods and bulk material. This topic is a subject that is established Combined with the engineering problem, Its purpose is to design one set of undulating belt conveyor that can be used safely and dependably on the given occasion.This article describes the design calculation of choosing the general equipments (the belt conveyor of series of DTⅡ), so it needs to choose every part of the belt conveyor though design calculation, and put them together to be used on the occasion. This text all said an in common use belt conveyer`s type and characteristics, the belt conveyer`s development present condition and difference of machine at home and abroad, and pointed out the belt conveyer`s develop direction lately. Then through systematic development of static quiet result, point out long haul distance and submit transport belt conveyer start and run problem in