红外瓦斯传感器微弱信号处理电路设计.PDFVIP

2010 仪 表 技 术 与 传 感 器 2010 6 Instrum ent Techn ique and Sensor No6 1 1, 2 1, 2 1, 2 1, 2 刘东旭 , 王志斌 , 张记龙 , 李 晓 , 田二明 ( 1. , 030051; 2. , 030051) : 为提高红外瓦斯传感器的检测灵敏度和 统信噪比, 基于微弱信号检测原理, 采用单光路双波长的实验方案, 设计了以差动放大电路为核心的微弱信号数据处理电路, 提高了 统的检测灵敏度, 电路结构简单实用可靠在实验 室条件下, 对该 统进行了瓦斯浓度的性能测试, 并对实验数据进行了数据拟合处理, 给出了瓦斯浓度与电压的关 式 试验结果表明, 该电路能够有效地提取瓦斯浓度变化量信息, 满足 统要求的 05% 检测灵敏度 : 红外瓦斯传感器; 微弱信号检测; 差动放大电路; 数据处理 : TP212 : A : 1002 1841( 2010) 06 0069 03 Design of Faint Signal Processing CircuitBased on InfraredM ethane Sensor 1 1, 2 1, 2 1, 2 1, 2 LIU Dongxu , WANG Zh ib in , ZHANG Ji long , LIX iao , TIAN Erm ing ( 1. Engineering echnology Research Center of ShanxiProvince for OptoElectronic Information and Instrument, North University of China, aiyuan 030051, China; 2. Key Laboratory of Instrumentation Science Dynamic M easurement, M inistry of Education, North University of China, aiyuan 030051, China) Abstract: In order to mi prove signal noise ratio and sensitivity of infrared methane gas sensor, the faint signal processing cir cu itw ith d ifferential amp lifier as the core was designed based on detection principle of faint signal.W ith the expermi ental schem e of single beam path and doub lew avelength, detection sensitivityw as enhanced. The circu it has the features of smi p licity, utility and credibility. Perform ance testw asm ade under laboratory conditions, expermi ental data was data fitting and relation betw een m ethane concentration and voltage was given. The resu lt of expermi ent indicates that the circu it can get the variab le quan