小三峡施工组织设计说明书..docx

本科生毕业设计说明书题 目 小三峡水电站工程施工组织设计（深入施工导流） 学 院 XXXXXXXXXXXXX 　 专 业 XXXXXXXXXXXXXXXX学生姓名 　 XXX学 号 XX年级XX指导教师 XX二Ο一四 年 六 月 一 日小三峡水电站工程施工组织设计（深入施工导流）专业：水利水电工程学生：XXX指导老师：XX摘要:小三峡水电站枢纽位于四川省米易县, 水工枢纽布置推荐方案拦河坝为闸坝，枢纽建筑物由左至右布置有左岸非溢流坝段、厂房、泄洪冲沙闸坝段和右岸堆石坝段。最大坝高26m，正常蓄水位1103.00m，电站装机容量30MW。本工程属三等中型工程。其主要建筑物为3级，次要建筑物为4级，临时建筑物为5级。本次施工组织设计对小三峡工程的进行了具体设计,主要内容如下:（1）在深入细致地分析工程基本资料的基础上，通过水力计算确定设计数据,初步选择、确定导流布置形式和方案——以分期导流方案作为小三峡水电站工程的施工导流方案；（2）对各导流分期的施工围堰和导流泄水建筑物进行深入的设计;(3)初步进行了小三峡水电站枢纽的施工方法、施工总布置和施工进度设计。 关键词： 导流方案 围堰 导流泄水建筑 施工方法 施工布置 施工进度The Constructiong Organaizationg Design of the Xiao-sanxia Water Power Station Abstract XiaoSanXia hydropower station locates in sichuan province MiYi county.Hydraulic Layout recommended plan for the dam with gates. Hub of the left bank of the building there is arranged from left to right non-overflow dam, plant, and the right bank of the spillway section of Flushing rockfill dam.The highest height of the dam is 26m and the normal pool level is1103.0m.The installed capacity of power station installed plant capacity is 30MW.This project belongs to medium of the third class.The main construction belongs to the third class. The secondary construction belongs to the forth class.The temporary interim construction belongs to the fifth class. The construction design of XiaoSanXia hydropower stationis specifically designed. The following major elements:（1）On the bases of deeply and carefully analyse the project of basic documents,through the hydraulic calculation to determine the dates of designed. Initial choice to determine the layout and diversion programs—to stage diversion program as the XiaoSanXia hydropower station construction diversion scheme.（2）The various stages of construction diversion cofferdam and diversion discharge structure design depth.（3）Initially on a small hub of the XiaoSanXia hydropower station construction method, design of general arrangement and construction schedule.KeywordDivers