基于DS12C887与液晶12864万年历程序.docVIP

基于DS12C887与液晶12864万年历程序 //需要原理图及综合程序的请加1968806018 验证信息 万年历 #include reg51.h #include intrins.h #include stdlib.h #define uchar unsigned char #define uint unsigned int /* 端口定义*/ #define LCD_data P0 //数据口 sbit LCD_RS = P2^3; //寄存器选择输入 sbit LCD_RW = P2^1; //液晶读/写控制 sbit LCD_EN = P2^2; //液晶使能控制 sbit LCD_PSB = P2^0; //串/并方式控制 sbit beep=P3^7; sbit dscs=P2^5; //ds12c887 sbit dsas=P2^6; sbit dsrw=P2^7; sbit dsds=P2^4; sbit dsirq=P3^3; sbit ds=P3^6; //温度传感器信号线 uint temp; float f_temp; bit flag1,flag_ri; uchar count,s1num,flag,t0_num; char miao,shi,fen,year,month,day,week=0x01,amiao,afen,ashi; void write_ds(uchar,uchar); void set_alarm(uchar,uchar,uchar); void read_alarm(uchar,uchar); uchar read_ds(uchar); void set_time(); uchar code dis1[] = {一}; uchar code dis2[] = {二}; uchar code dis3[] = {三}; uchar code dis4[] = {四}; uchar code dis5[] = {五}; uchar code dis6[] = {六}; uchar code dis7[] = {日}; uchar code dis8[] = {20 年 月 日}; uchar code dis9[] = {星期 ℃}; uchar code dis10[]= { : : }; uchar code dis11[] = {学海无涯苦作舟!}; uchar code dis12[] = {0123456789}; void delay_1ms(uint x) //延时函数 { uint i,j; for(j=0;jx;j++) for(i=0;i110;i++); } void write_cmd(uchar cmd) //写液晶指令函数 { LCD_RS = 0; LCD_RW = 0; LCD_EN = 0; P0 = cmd; delay_1ms(5); LCD_EN = 1; delay_1ms(5); LCD_EN = 0; } void write_dat(uchar dat) //写液晶数据函数 { LCD_RS = 1; LCD_RW = 0; LCD_EN = 0; P0 = dat; delay_1ms(5); LCD_EN = 1; delay_1ms(5); LCD_EN = 0; } void lcd_pos(uchar X,uchar Y) //设定液晶显示位置函数 { uchar pos; if (X==0) {X=0x80;} else if (X==1) {X=0x90;} else if (X==2) {X=0x88;} else if (X==3) {X=0x98;} pos = X+Y ; write_cmd(pos); //显示地址 } void lcd_init() //LCD初始化设定 { uchar i; write_ds(0x0A,0x2