1602LCD简单时钟显示实验C语言.docVIP

1602LCD简单时钟显示实验C语言 #include reg51.h #define uchar unsigned char sbit RW=P2^3; sbit RS=P2^2; sbit E=P2^4; bit at=0; //sbit busy_bit=P1^7; uchar code shen[]={CLOCK!}; uchar code word[]={0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,0x38,0x39,0x3a,0x20}; uchar dispbuf[8],h,m,s,counter; void delay() { uchar i; for(i=0;i255;i++); } /*******写命令**********/ void lcd_wmc(uchar i) { P0=i; RS=0; RW=0; E=0; delay(); E=1; } /*******写数据***********/ void lcd_wmd(uchar i) { P0=i; RS=1; RW=0; E=0; delay(); E=1; } /*******初始化液晶*******/ void lcd_init() { uchar i; lcd_wmc(0x01); lcd_wmc(0x38); lcd_wmc(0x0c); lcd_wmc(0x06); lcd_wmc(0xc9); for(i=0;i6;i++) lcd_wmd(shen[i]); lcd_wmc(0xc0); } /*******更新缓冲区子程序*******/ void newbuf() { dispbuf[0]=s%10; dispbuf[1]=s/10; dispbuf[3]=m%10; dispbuf[4]=m/10; dispbuf[6]=h%10; dispbuf[7]=h/10; } /*******显示子程序**********/ void disp(uchar dispadd) { uchar tmp; lcd_wmc(dispadd); tmp=dispbuf[7]; tmp=word[tmp]; lcd_wmd(tmp); tmp=dispbuf[6]; tmp=word[tmp]; lcd_wmd(tmp); tmp=dispbuf[5]; tmp=word[tmp]; lcd_wmd(tmp); tmp=dispbuf[4]; tmp=word[tmp]; lcd_wmd(tmp); tmp=dispbuf[3]; tmp=word[tmp]; lcd_wmd(tmp); tmp=dispbuf[2]; tmp=word[tmp]; lcd_wmd(tmp); tmp=dispbuf[1]; tmp=word[tmp]; lcd_wmd(tmp); tmp=dispbuf[0]; tmp=word[tmp]; lcd_wmd(tmp); } /*********************键盘子程序***********************/ uchar keypro(void) { uchar scanl,scanh; P1=0xf0; if((P30xf0)!=0xf0) { delay(); if((P10xf0)!=0xf0) { scanl=0xfe; while((scanl0x10)!=0) { P1=scanl; if((P30xf0)!=0xf0) { scanh=(P10xf0)|0x0f; return (~scanh)+(~scanl); } else scanl=(scanl1)|0x01; } } } return 0; } /********************时间调整子程序********************/ void adjustime() { uchar k; static uchar add; k=keypro(); switch(k) { case 0x88: if(!at){add=0xc1;EA=0;