激光重熔镍基合金火焰喷焊层组织及性能.PDFVIP

35 9 Vol. 35, No. 9 2008 9 CHINESE JOURNAL OF LA SERS September, 2008 : 02582 025(2008)0 激光重熔镍基合金火焰喷焊层组织及性能 洪永昌 ( , 243002) (OM)(SEM) X (XRD) Ni , , C2( Ni, Fe)Cr C , Cr C , Cr B, CrB, Cr B , Fe B, Fe B , 23 6 3 2 5 3 3 2 , , , , , , ;, , ; 360 mm/ min, 600 e @3 h , Ni , ;; ; ; TN 249; TG 156. 99 A doi: 10. 3 88/ CJ 1388 Microstructure and Performance of Laser Remelting Ni2Based Alloy Sprayed2Welding Layers Hong Yongchang ( School of Materials Science and Engineering, Anhui University of Technology, Ma. anshan, Anhui 243002, China) Abstract N2i based alloy flame sprayed2welding layer s refusioned under different laser processing parameters, microstructure and phase identity in different temperature drawing temper were invest igat ed using optical microscope ( OM), scanning electron microscopy ( SEM) and X2ray diffractometer ( XRD) . The hardness test and wear resistance were also performed. The experimental results show that the phases of the remelted flame sprayed2 welding layers mainly consist of C2 ( Ni, Fe), Cr C , Cr C , Cr B, CrB, Cr B , Fe B and Fe B. Compared with the 23 6 3 2 5 3 3 2 flame sprayed2welding layers, microstructure of the remelted sprayed2welding layers are further refined, hardness and wear resist ance are obviously enhanced. Under the same technological conditions, microstructure would be more compacted and finer, hardness and wear resistance would be higher with the