立式集热板太阳能热气流电站系统研讨.pdfVIP

中国工程热物理学会 传热传质学 学术会议论文 编号：093072 立式集热板太阳能热气流电站系统研究 周艳，李庆领，李洁浩，刘晓慧 （青岛科技大学机电工程学院，山东 青岛 266042） Tel Email:zhouyanqd@163.com） （ 摘要：设计了一种立式集热板式太阳能热气流电站，分析了该系统的最大输出功率及能量转换率。数 学模型考虑了系统尺寸、太阳辐射及环境条件对系统最大输出功率的影响。结果表明系统最大输出功 率不仅是烟囱高度的函数，同时与太阳辐射及环境参数有很大关系。受结构限制，在太阳辐射强度为 1000W/m2 、烟囱高度为100m 时，本系统能量转换率约为0.2%，在设计上可考虑采用多条集热式烟囱通 道并联方式来增加集热面积，以达到提高系统最大输出功率的目的。 关键词：太阳能热气流电站；立式集热热板；系统最大输出功率；系统能量转换率 中图分类号：TK124 文献标识：A A study on solar chimney power plant system with vertical collector LI Qing-ling, ZHOU Yan, LI Jie-hao, LIU Xiao-hui (College of Mechanical and Electronical Engineering, Qingdao University of Science and Technology, Shandong Qingdao 266061) Abstract: A solar chimney power plant system with vertical collector is designed, analysis on the output power and the energy conversion efficiency of the system has been presented. The effects of various geometry parameters, the solar radiation and environmental conditions influence on the maximum power output and efficiency of the system have been considered to develop the mathematical model. The result show that: The maximum power output is a function of not only the chimney height, but also the solar radiation and environmental conditions as well. By constrains of the system structure, when the solar radiation is 2 1000W/m and the chimney height is 100m, the energy conversion efficiency is about 0.2%. So the design that a number of parallel collecting channel are built to increase the collecting area could be considered to achieve the target of increasing the maximum