毕业论文_中英文翻译_集散控制,PLC和组态软件.docVIP

A typical DCS control system And Controlling System Based on PLC DCS (Distributed control system) is a microprocessor-based centralized onitoring of the production process, operation, management, centralized and decentralized control of distributed control system, called DCS. The system will be used in a number of units distributed process control computer, all information through the communication network by the host management computer monitor, to achieve optimal control, the device inherits the conventional instrument distributed control and the advantages of computer control to overcome the normal function of a single instrument, Human - Machine Contact poor and the single risk of micro-computer control system of a high concentration of defects, both achieved in the management, operation and display of three concentrate, but also realized in functionality, load and risk of spread in three areas. DCS system in the modern production process control plays an important role.  Distributed control systems typically have the following four components: Field control level  known as data acquisition devices, mainly the non-control variables during data acquisition and preprocessing, and further processing of real-time data for the CRT display and print operation station, in order to achieve open-loop monitoring, and collected data to monitoring computer. Output device in a PC case, or can switch analog signals the way the computer output to the terminal device control commands. This is one level directly to the scene, the process is connected with the site. Such as valves, motors, sensors, transmitters, actuators and so on. They are the basis for industrial field device, it is also the basis of DCS. In the DCS system, this level of function is to obey the commands sent by the host computer, while upward-bit machine feedback implemented. Take for example the armed forces to the case, can be described as the bottom of the soldiers. They just follow orders accuratel