基于51单片机的红外遥感电子时钟.docxVIP

/*功能基本已经实现*//*时间显示格式为##-##-##。遥控设置时间。遥控键key1、key2调节小时，key3、key4调节分钟， key5、key6调节秒，退出键控制退出设置。定时器T0用于控制1s，定时器T0和外部输入用于控制红外接收。*/#include REGX51.H/*定义变量*/#define uint unsigned int#define uchar unsigned charsbitdula=P1^0; //段选标志sbitwela=P1^1; //位选标志sbit beep=P2^0; //闹铃标志bit irpro_ok,irok; //红外处理标志ucharIRcord[4]; //存储处理后的红外码值数组ucharirdata[33]; //存储处理前的33位红外码值数组ucharirtime; //红外处理用全局变量uchar num1,num2,num3,num4,hh,hl,mh,ml,sh,sl,hhc=1,hlc,mhc,mlc,shc,slc;//时分秒用定义全局变量uchar num5,num6,num7,num8,hh1,hl1,mh1,ml1,sh1,sl1,hh2,hl2,mh2,ml2,sh2,sl2;uchar code table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; //0 1 2 3 4 5 6 7 8 9uint key1,key2,key3,key4,key5,key6; //按键定义uintset_sign,clock_sign,settime_ok; //进入设置时间标志/*函数声明*/void EX0init(); //外部初始化函数void TIM0init(); //T0初始化函数void TIM1init(); //T1初始化函数void clock(); //闹钟函数void Hwscan(); //红外扫描函数void Ir_work(); //红外键值散转处理函数void Ircdeal(); //红外码值处理函数void key_work(); //遥控键值操作处理函数void clock_set();//遥控设置闹钟时间函数void delayms(uint); //延迟函数void display(uchar,uchar,uchar,uchar,uchar,uchar);//显示函数/*-主函数-*/void main(){TIM1init(); //定时器1初始化TIM0init(); //定时器0初始化EX0init(); //初始化外部中断while(1){Hwscan();//红外扫描display(hh,hl,mh,ml,sh,sl);key_work();clock();}}/*------------------------------------------------定时器0初始化（定时器用来计算电平的长度）------------------------------------------------*/void TIM0init(void) //定时器0初始化{ TMOD=0x12; //定时器0工作方式2，TH0是重装值，TL0是初值 TH0=0x00; //重载值 TL0=0x00; //初始化值 ET0=1; //开中断 TR0=1; }/*定时器T1初始化*/void TIM1init(){TMOD =0x12; //定时器1工作方式1TH1 =(65536-50000)/256;TL1 =(65536-50000)%256;ET1 =1;TR1 =1;}/*------------------------------------------------外部中断0初始化------------------------------------------------*/void EX0init(void){ IT0 = 1; //指定外部中断0下降沿触发，INT0 (P3.2) EX0 = 1; //使能外部中断 EA = 1;