摩擦型高强度螺栓连接抗滑移系数的试验研讨.pdfVIP

第十一届全国实验力学学术会议 大连 2005 摩擦型高强度螺栓连接抗滑移系数的试验 研究 张小鹏，于金莹 （大连理工大学 工程力学系，大连 116024） 摘要：随着高强度螺栓连接技术的日益发展及其在工业与民用建筑、桥梁建筑等工程结构中 的广泛应用，人们都十分重视摩擦面处理技术的研究，以寻求提高抗滑移系数值的有效方法。 国内外许多试验研究表明，抗滑移系数是随摩擦面处理方法的不同和生锈时间的长短而变化 的。一般来说，摩擦面作处理后的抗滑移系数值要比未作处理的高。但是，摩擦面经机械处 理后再进行化学处理，会导致抗滑移系数值的降低。下面通过采用扭矩法对钢结构中摩擦型 高强螺栓连接摩擦面的抗滑移系数进行试验研究，进而讨论摩擦面的不同处理方法对抗滑移 系数的影响。最后提出改进方法和前景展望。 关键词：高强度螺栓；扭矩法；摩擦面；抗滑移系数 Experimental Research on the Anti-sliding Coefficient of High Strength Bolts with a Frictional Type Connection ZHANG Xiaopeng, YU Jinying (Department of Engineering Mechanics, DaLian University of Technology, Dalian 116024) Abstract: With development of high strength bolts connection technique increasingly and its extensive applicat ion in engineering construction like public building and bridge building etc, people value very much research of processing technique for friction surface, to look for valid method of increasing the anti-sliding coefficient. Domestic and international experimental research largely indicates that the anti-sliding coefficient is variational along with processing method and rusting time. In a general way, the anti-sliding coefficient is bigger at friction surface after handling than that not handling. But, for the friction surface making chemical treatment after mechanical treatment will cause reduce of the anti-sliding coefficient. Next, we proceed experimental research on the anti-sliding coefficient of high strength bolts with a frictional type connection in steel st ructure, adopting to the method of torque; and discuss the influence of processing technique of friction surface t