面向高效低碳的机械加工工艺路线多目标优化模型_李聪波精选.pdfVIP

50 17 Vol.50 No.17 2 0 1 4 9 JOURNAL OF MECHANICAL ENGINEERING Sep. 2 0 1 4 DOI 10.3901/JME.2014.17.133 * 1 1 1 1, 2 3 (1. 400030 2. 400023 3. 401336) ()()NSGA-II(Non-dominated sorting genetic algorithm II) TH162 Multi-objective Machining Process Route Optimization Model for High Efficiency and Low Carbon LI Congbo 1 LI Pengyu 1 LIU Fei 1 CUI Longguo 1, 2 SHUI Hong 3 (1. State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400030; 2. Chongqing Institute of Standardization, Chongqing 400023; 3. Chongqing NO.2 Machine Tool Works Co.,Ltd, Chongqing 401336) Abstract The process route rules the whole machining process from blanks to parts. It can directly affect the low carbon production of the mechanical product. To achieve the low-carbon optimization decisions of machining process route, the concept of feature element and machining element is introduced to express the component characteristics, and a multi-objective optimization model is established, which takes the minimum total processing time and the lowest total carbon emissions as the optimization objectives. Then the optimization model is solved based on NSGA-II (Non-dominated sorting genetic algorithm II). An experiment case of a motor seat machining process is performed to verify the feasibility and practicability of the proposed model. Key words: process route high efficiency and low