单螺杆泵选型数据参考.docVIP

G135-2单螺杆泵 一、单螺杆泵 标准型号Standard model 每100转理论流量Theoretical flow(L)/100 revolutions 允许工作压力(MPa)Allowable max particulate size (mm) 允许最大颗粒粒径(mm)Allowable max particulate size(mm) 转速流量近似成正比关系Rotation flow is approximate to proportion 泵合理流量范围(m3/h)Rational flow range of pump(m3/h) 最佳工作转速Optimum working rotation velocity(r/min) 配套电机功率(KW)Power of the matching motor(kw) 吸入法兰Pump-in flange 排出法兰Pump-out flange 配套代号与方式Matching code and mode 泵400r/min?时流量(M3/h)Flow(m3/h)when the pump is 400r/min 孔径(mm)Orifice size (mm) 通径(mm)Though oath (mm) 孔径(mm)Orifice size (mm) 通径(mm)through path (mm) 可选方式(代号)Options(code) 有以下多种配套方式A suite of configuration available as shown as below G15-1 1.63 0-0.6 3 0.3 0.3-0.8 400-1000 0.55-0.75 125 50 110 40 .5. 1、表示6极电机直带?Indicating the straight belt of motor with 6 steps2、配减速箱与普通4极电机With reducer casing and normal motor of 4 step3、配减速箱与防暴电机With reducer casing and rxplosion-proof motor4、调速电机或无级变速电机直带Straight belt of variable speed motor or stepless variable speed motor5、配减速箱与调速电机（或无级变速电机）WIth reducer casing asd variable speed motor (or stepless variable speed motor)6、采用皮带轮减速背包式安装Installation of belt pulley by reducing kit7、采用皮带轮减速旁置式安装installation of belt pulley by side reducer8、配减速箱与6极电机With reducer casing and motor with 6steps9、配减速箱与8极电机With reducer casing and motor with 8 steps注：客户可根据工况需要选择直立式安装单螺杆泵Note:Customers can select vertical single screw pump as required by the behaviors G15-2 1.63 0-12 3 0.3 0.3-0.8 400-1000 0.75-1.1 125 50 110 40 G15-3 1.63 0-18 3 0.3 0.3-0.8 400-1000 1.1-1.5 125 50 110 40 G15-4 1.63 0-2.4 3 0.3 0.3-0.8 400-1000 1.5-2.2 125 50 110 40 G25-1 6.27 0-0.6 5 1.2 1-3.4 400-900 1.1-1.5 125 50 110 40 G25-2 6.27 0-1.2 5 1.2 1-3.4 400-900 1.5-2.2 125 50 110 40 G25-1A 12.65 0-0.6 5 2.4 2-5.5 400-900 1.5-2.2 125 50 110 40 G35-1 13.11 0-0.6 6 2.7 4-6 400-900 2.2-3 145 65 145 65 G35-2 13.11 0-1.2 6 2.7 4-6 400-900 3-4 145 65 145 65 G40-1 24.91 0-0.6 8 5.0 6