最全的外贸采购条款.doc

----------------------- 页面 1----------------------- SKF General Conditions of Purchase 斯凯孚采购一般条款 Valid from 2008-05-21 自2008年5月21 日起生效 These conditions of purchase shall apply in full unless otherwise agreed in writing. Any other general conditions shall not be applicable, even if they were not rejected explicitly in any individual case. 除另有书面约定，本采购一般条款应当全部适用。任何其他一般条款不应适用，即使其在任何个别情况下 未被明示拒绝。 1. Definitions 1. 定义 1.1 ”SKF” shall mean any company within the SKF Group of companies purchasing products under these General Conditions. 1.1 “斯凯孚”应指在本一般条款下采购产品的斯凯孚集团内的任何公司。 1.2 ”Supplier” shall mean any company delivering products to SKF under these General Conditions. 1.2 “供应商”应指在本一般条款下交付产品给斯凯孚的任何公司。 1.3 ”Agreement” shall mean any agreement between SKF and the Supplier related to the sale and purchase of any products. These General Conditions and the SKF Quality Standards for Suppliers (as defined below) form an integral part of the Agreement. 1.3 “协议”应指斯凯孚与供应商之间有关销售及采购产品的任何协议。本一般条款及斯凯孚对供应商质 量标准（定义如下）是协议的有效组成部分。 1.4 ”Products” shall mean any products and services purchased by SKF under these General Conditions. 1.4 “产品”应指斯凯孚在本一般条款下购买的任何产品及服务。 1.5 ”Defective Products” shall mean Products that are not in accordance with technical and other specifications specified or otherwise established by SKF or are not fit for the purpose intended. In the absence of documented SKF requirements, ”Defective Products” shall mean Products that are not in accordance with approved sample deliveries of the Products or where no samples are delivered, do not conform to generally accepted industry standards. 1.5 “瑕疵产品”应指不符合斯凯孚指定的或另行建立的技术规格及其它规格的产品或不符合特定用途的 产品。如无成文的斯凯孚要求，“瑕疵产品”应指与经批准的产品的交付样品不符之产品，或在无样品交 付的情况下，与普遍接受的行业标准不符之产品。 1.6 ”SKF Quality Standard for Suppliers” shall mean quality requirements issued by SKF Group Purchasing. 1.6 “斯凯孚对供应商质量标准“应指斯凯孚集团采购部出具的质量要求。 2. Inspection of production 2.