180C柴油机活塞加工工艺设计.doc

毕业设计（论文）任务书 专业 机械设计制造及其自动化 班级 机械05 姓名 下发日期 200-3-10 题目 专题 主 要 内 容 及 要 求 设计内容：首先仔细分析所加工零件的主要表面、技术要求、生产纲领，制定一套以上的本零件的加工工艺规程，认真分析各规程的优缺点，从中选择最优的，根据这一规程，绘制出各个主要工序的工序卡片，设计主要工序的机床夹具，分析计算定位误差，设计机床夹具的主要零件。 要求：根据给定的零件图，制定出符合加工要求的工艺规程，并对所制定的各种规程进行可得性和优化性比较，从中选出最好的工艺设计，设计其中重要工序的工艺装备，要求的图纸量折合为零号图后不少于张，设计说明书不少于万字。主要技术参数 主要数据： 生产进 度 及 完 成 日 期 月日月日月日月日月日月月日月日月日月日月日月日月日）月日月日）教学院长签字 日 期 教研室主任签字 日 期 指导教师签字 日 期 关键字：活塞；工艺路线；加工设备；切削用量；夹具 Abstract In diesel engine cylinder, the piston part of the cycle in the compressed gases, and in another part of the work cycle of the combustion gas mixture within the cylinder so the piston top surface expansion high pressure (about 116 ~ 120Kgf/cm2)?under high temperature (about 569°C) gas role, and the pressure through the piston pin, connecting rod to the crankshaft. Can be seen that the piston is a long time under high temperature and high pressure in continuous reciprocating motion of the load, its load and working conditions were appalling. During the design process of the piston will be designed to ensure long-term stability of the work piston. The design of the work done by a brief introduction as follows:  Diesel Engine Piston 180C reasonable processing technology is important, the role of parts and technology program analysis, preparation of rough form and process manufacturing line, through the analysis, comparison, use of the relative concentration of processing programs, and ultimately more reasonable to determine the mechanical line processing. The development process of rough line the main consideration, finishing arrangements, choice of processing methods, centralized and decentralized processes, such as processing the order requirements. Then determine the allowance, process size, after the analysis of the characteristics of the process, select the appropriate processing equipment and technical equipment. Calculated look-up table to determine the next major piston cutting process and the mapping of processes card, th