机械制造技术课程设计-丝杠支座的加工工艺及钻3-φ6夹具设计.docVIP

辽宁工程技术大学 课 程 设 计 题 目：丝杠支座的机械加工工艺规程及 钻3-φ6夹具设计 班　　级：　 机械13-3 姓　　名：　 学 号： 指导教师： 完成日期：　 2016.6.28 摘要 本文是对丝杠支座零件加工应用及加工的工艺性分析，主要包括对零件图的分析、毛坯的选择、零件的装夹、工艺路线的制订、刀具的选择、切削用量的确定、加工工艺文件的填写。选择正确的加工方法，设计合理的加工工艺过程。此外还对丝杠支座零件的工序的加工设计了专用夹具. 机床夹具的种类很多，其中，使用范围最广的通用夹具，规格尺寸多已标准化，并且有专业的工厂进行生产。而广泛用于批量生产，专为某工件加工工序服务的专用夹具，则需要各制造厂根据工件加工工艺自行设计制造。 全套图纸，加 ABSTRACT This paper is to screw bearing parts processing application and processing technology and analysis, including the parts of the plan, the choice of blank, the clamping, the craft route making, tool selection, the determination of cutting conditions, processing documents. Choose the correct processing methods, design the reasonable process. In addition to the support parts of the process design of special fixture. Machine tool fixture of many kinds, among them, the most widely used common fixture, size specifications have been standardized, and a professional production plant. While widely used in batch production, specially for a workpiece processing services for the fixture, it needs each factory according to workpiece machining technology to design and manufacture. In this paper, fixture design are the main contents of design jig boring machine and milling fixture, the design of a test fixture. Key words: support, processing technology, processing method, process documentation, fixture 目录 1零件工艺性分析----------------------------------------51.1用途----------------------------------------------51.2技术要求------------------------------------------51.3工艺性--------------------------------------------61.4生产类型------------------------------------------62机械加工工艺规程设计----------------------------------62.1确定毛坯，绘制毛坯简图----------------------------62.2定位基准------------------------------------------ 2.3加工方法------------------------------------------ 2.4加工阶段与工序------------------------------------3钻孔加工夹具设计-------------------------------------1 3.1研究原始质料-------------------------------------13 3.2定位