信号与系统9-1 Chapter 9 The Laplace transform.ppt

Chapter 9 The Laplace transform Definition and properties Signal transform System expression System response 9.1 The Definition and basic transform pairs Transform pair Definition The relation with the Fourier transform Simplify: Included: Basic transform pairs when Basic transform pairs when Convergence condition when Region limitations for complex variable s ! Basic transform pairs when 9.2 The region of convergence (ROC) Each Laplace transform must be linked with a region of convergence (ROC) and only valid in its ROC ! The expression of ROC The region of convergence may be expressed as follows : Poles and zeros of the Laplace transform zero pole For a given , the order of its zeros and poles must be same (some of them may be at ) Pole-zero plot In s-plane , ROC is divided by poles . There are no poles in ROC Three possible ROCs ! The relation between poles and ROC The relation of ROC with the region of time signal two sided left sided right sided finite duration strip left plane right plane entire plane Examples for Laplace transform 9.3 Right-sided Examples for Laplace transform 9.4 Right-sided Examples for Laplace transform 9.4 Right-sided Examples for Laplace transform 9.5 Right-sided