AISC Design Guide 6 Load And Resistance Factor Design Of WShapes Encased In Concrete.pdf英文资料.pdfVIP

Steel Design Guide Series Load and Resistance Factor Design of W-Shapes Encased in Concrete © 2003 by American Institute of Steel Construction, Inc. All rights reserved. This publication or any part thereof must not be reproduced in any form without permission of the publisher. Steel Design Guide Series Load and Resistance Factor Design of W-Shapes Encased in Concrete Lawrence G. Griffis Walter P. Moore and Associates, Inc. Houston, Texas A M E R I C A N I N S T I T U T E O F S T E E L C O N S T R U C T I O N © 2003 by American Institute of Steel Construction, Inc. All rights reserved. This publication or any part thereof must not be reproduced in any form without permission of the publisher. Copyright 1992 by American Institute of Steel Construction. All rights reserved. No part of this publication may be reproduced without written permission. Published by the American Institute of Steel Construction, Inc. at One East Wacker Drive, Suite 3100, Chicago, IL 60601-2001. © 2003 by American Institute of Steel Construction, Inc. All rights reserved. This publication or any part thereof must not be reproduced in any form without permission of the publisher. TABLE OF CONTENTS INTRODUCTION 1 Load and Resistance Factor Design (LRFD) of Composite Columns 7 SCOPE 1 Comparison Between LRFD and Strain Compatibility Methods 8 PART 1: USE AND DESIGN OF Des