毕业的设计---LED_MONITOR底座综合分析.docVIP

目 录 第一章 绪论·······························································2 1.1 LED Monitor 转轴类型分析········································2 1.2 底座整体认识 ···················································5 第二章 扭力计算分析 ······················································6 第四章 零件性能介绍······················································11 4.1主要零件名称···················································11 4.2主要零件功能····················································12 4.3主要零件材质···················································13 4.4主要零件制作流程················································14 第五章 转轴及底座的装配··················································19 5.1 重点配合尺寸···················································19 5.2 转轴部分装配···················································19 5.3 塑胶部分装配···················································21 参考文献·································································23 致谢·····································································24 附录 各零件及整体底座装配图 摘要 由于计算机LED Monitor 的普及率迅速的成长，一般人每天使用计算机显示器的时间也愈来愈长。而一般显示器通常高度固定，无法调整适合每一个人的高度，长时间的使用会影响视力的健康，由于个人对于视力健康的重视，升降型LED Monitor 也因此因应而生，因此升降机构可以根据使用着的习惯及使用的方式调整出最舒适的高度。由于计算机的使用愈来愈普及，LED Monitor 的需求量也与日剧增，一般的LED Monitor 仅有的显示功能已无法符合人们的需求，各家大厂进而着重在LED Monitor 的造型及附加功能上去下功夫，如因须缩小材积而开发的收纳功能(两段式)、为符合人体工学调整LED 高度而发展出升降式结构，因升降式无法收纳而开发出四连杆机构…等等。 关键词：LED Monitor，造型，附加功能 第一章、绪论 1.1 LED Monitor 转轴类型分析 1.1.1一般LED型式转轴 (1) 一般型式LED转轴结构：心轴+铁片+弹片 (2) 单轴向转动方式为传统形式的面板转动方式。由于转轴需支撑较大力量,所以在这种情况下转轴结构大多采用弹片式结构，即一般型式的LED转轴结构。 (3) 结构实例 1.1.2弹簧型式LED转轴 (1) 弹簧型式LED转轴结构为：一般型+弹簧 即心轴+铁片+弹片+弹簧 (2) 此结构为将弹簧加在一般型转轴上，以加强转轴扭力满足设计需求。 (3) 结构实例 1.1.3 按钮型式LED转轴 (1) 按钮型式LED转轴结构为：心轴+铁片+弹片+弹簧 (2) 此结构为在转轴上加一弹簧按钮，以产生两段式收纳条件的结构。 (3) 结构实例 1.1.4 两段扭力型式LED转轴 (1) 两段扭力型式LED转轴结构为：心轴+铁片+弹片+过点片+（弹簧） (2) 此结构为在转轴上加上凸点过点片设计，以达到两段扭力规格的设计需求。 (3) 结构实例 1.1.5 多轴向型式LED转轴 (1) 多轴向型式LED转轴结构为：心轴+铁片+弹片+（过点片）+（弹簧） (2) 两轴向或多轴向,有时会在横向心轴上加上扭簧辅助,以达到辅助支撑的效果,让使用者在将面板往上移动时较为容易,有时也会配合过点片一起使用，以便达到荧幕在其他轴向运动的