High Speed Communication Circuits and Systems Low Noise Amplifiers英文文献.pdfVIP

6.776 High Speed Communication Circuits and Systems Lecture 12 Low Noise Amplifiers Massachusetts Institute of Technology March 15, 2005 Copyright © 2005 by Hae-Seung Lee and Michael H. Perrott Narrowband LNA Design for Wireless Systems Zin From Antenna PC board and Bandpass trace To Mixer Filter Zo Package LNA Interface Design Issues - Noise Figure – impacts receiver sensitivity - Linearity (IIP3) – impacts receiver blocking performance - Gain – high gain reduces impact of noise from components that follow the LNA (such as the mixer) - Power match – want Zin = Zo (usually = 50 Ohms) - Power – want low power dissipation - Bandwidth – need to pass the entire RF band for the intended radio application (i.e., all of the relevant channels) - Sensitivity to process/temp variations – need to make it manufacturable in high volume H.-S. Lee M.H. Perrott MIT OCW Our Focus in This Lecture Zin From Antenna PC board and Bandpass trace To Mixer Filter Zo Package LNA Interface Designing for low Noise Figure Achieving a good power match Hints at getting good IIP3 Impact of power dissipation on design Tradeoff in gain versus bandwidth H.-S. Lee M.H. Perrott MIT OCW