电子时钟程序代码.docVIP

#includereg52.h #define uchar unsigned char #define uint unsigned int uchar code weixuan[8]={0x80,0x40,0x20,0x10,0x08,0x04,0x02,0x01}; //位选，控制哪个数码管亮。（从右到左） uchar code duanxuan[12]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0xbf,0xff}; //0-9，-，灭 uchar data timedata[3]={0x00,0x00,0x00}; //时间缓冲区，分别为：秒、时、分。 uchar data datetime[8]={0xc0,0xc0,0xbf,0xc0,0xc0,0xbf,0xc0,0xc0}; //时间缓冲区，初始化显示00-00-00。 uchar tt1,tt2,tt,tt0,num=0; uchar flag,flag1,flag2,flash; sbit key1=P1^3; sbit key2=P1^5; sbit key3=P1^7; //**************延时函数********************************* void delay(uint del) { uchar i, j;