TSM 0500G_2010-10-内饰非金属材料阻燃性能测试方法.pdf

TOYOTA ENGINEERING STANDARD NO.: TSM0500G TITLE: Flammability test method for interior non-metallic materials CLASS: C1 Established/Revised: Rev. 12 ( Oct. 2010 ) This standard has been revised as a result of the following changes: (1) consistency has been ensured with international standard (ISO 3795) and Chinese standard (GB8410-2006); (2) test piece conditioning regarding humidity has been changed; (3) test environmental conditions have been changed; (4) tolerance has been added to distance between bench marks (A) and (B); and (5) natural gas has been added to gas types. Prepared and Written by: Design Quality Innovation Div. Organic Material Dept. ⒸTOYOTA MOTOR CORPORATION Vehicle Material Engineering Div. For Limited Distribution Do Not Reproduce CLASS TOYOTA ENGINEERING STANDARD TSM0500G C1 Flammability test method for interior non-metallic materials 1. Scope This standard covers the test method for flammability of non-metallic materials used for automobile interior. 2. Flammability Test Method 2.1 Test Apparatus This shall consist of the metal cabinet and burner(1) shown in Fig. 1 and U-shape clamp shown in Fig. 2. Note (1): When a test corresponding to Chinese regulation (GB8410-2006 Flammability of automotive interior materials) is conducted, the test may be conducted using a test device specified in 4.2.1 A test cabinet which is made of