数控直流电流源有关资料(附c程序)(可编辑).docVIP

数控直流电流源有关资料(附c程序) 数控源一任务设计数控电源其原理示意图如二要求 1基本要求 1输出电范围～22发挥部分1三评分标准 项目 满分 基本要求 设计与总结报告方案比较设计与论证理论分析与计算电路图及有关设计文件测试方法与仪器测试数据及测试结果分析 50 实际完成情况 50 发挥部分 完成第 1 项 完成第 2 项 完成第 3 项 完成第 4 项 其他 说明需测量端数控直流恒流源的设计与制作 发表日期2006年5月1日 出处本站原创 编辑录入zouwenkun 《数控直流恒流源 》 《数控恒流源获奖证书》摘要本系统以直流电流源为核心AT89S52单片机为主控制器通过键盘来设置直流电源的输出电流设置步进等级可达1mA并可由数码管显示电流设定值和实际输出电流值本系统由单片机程控设定数字信号经过DA转换器AD7543输出模拟量再经过运算放大器隔离放大控制输出功率管的基极随着功率管基极电压的变化而输出不同的电流单片机系统还兼顾对恒流源进行实时监控输出电流经过电流电压转换后通过AD转换芯片实时把模拟量转化为数据量再经单片机分析处理通过数字量形式的反馈环节使电流更加稳定这样构成稳定的压控电流源实际测试结果表明本系统能有效应用于需要高稳定度的小功率恒流源的领域关键词压控恒流源 智能化电源 闭环控制 The Digital Controlled Direct Current SourceAbstract In this system the DC source is center and 89S52 version single chip microcomputer SCM is main controller output current of DC power can be set by a keyboard which step level reaches 1mA while the set value and the real output current can be displayed by LED In the system the digitally programmable signal from SCM is converted to analog value by DAC AD7543 then the analog value which is isolated and amplified by operational amplifiers is sent to the base electrode of power transistor so an adjustable output current can be available with the base electrode voltage of power transistor On the other hand The constant current source can be monitored by the SCM system real-timely its work process is that output current is converted voltage then its analog value is converted to digital value by ADC finally the digital value as a feedback loop is processed by SCM so that output current is more stable so a stable voltage-controlled constant current power is designed The test results have showed that it can be applied in need areas of constant current source with high stability and low power Keywords voltage-controlled constant current source intelligent powerclosed loop control 前言 随着电子技术的发展数字电路应用领域的扩展现今社会产品智能化数字化已成为人们追求的一种趋势设备的性能价格发展空间等备受人们的关注尤其对电子设备的精密度和稳定度最为关注性能好的电子设备首先离不开稳定的电源电源稳定度越高设备和外围条件越优越那么设备的寿命更长基于此人们对数控恒定电流器件的需求越来越迫切