NDE考评实施细则.doc

WRITTEN PRACTICE FOR NDE PERSONNEL TRAINING，QUALIFICATION AND CERTIFICATION PREPARED BY: DATE: APPROVED BY: DATE: APPROVED BY: DATE: ACCEPTED BY AI: DATE: ARCUS (Tieling) Oilfield Equipment Co, Ltd. SCOPE AND APPLICABILITY This document defines the practice in ARCUS for the control and administration of training, examination, qualification and certification of personnel performing nondestructive examination for the boiler and pressure vessel components conforming to the ASME Boiler Pressure Vessel Code Section I, VIII Div.1, and ASME B31.1. This Written Practice has been developed based upon SNT-TC-1A, (2006 Edition), and satisfies the requirements of the ASME Boiler Pressure Vessel Code Section I, VIII, Div.1, and ASME B31.1. Qualification and certification of nondestructive examination personnel in accordance with this Written Practice shall be applicable to each of the following methods: Radiographic Examination (RT) Magnetic Particle Examination (MT) Liquid Penetrant Examination (PT) RESPONSIBILITY AND LEVELS OF QUALIFICATION The Engineering and Quality Dept. Manager is responsible for administration of this Written Practice. The NDE Level III shall be responsible for preparing an adequate NDE training program, which shall be approved by the responsible NDE Engineer (Level III). The levels of qualification are divided into three levels (Level I, II, and III) for each NDE method as specified in para.1.3. The responsibilities of three levels of NDE Personnel are as follows. NDE Level I An NDE Level I personnel shall be qualified to properly perform specific calibrations, specific examinations and specific evaluations for acceptance or rejection determinations according to written instructions and to record examination results. The NDE level I shall receive the necessary instruction or supervision from