洛阳龙门钟楼结构模型分析和关键节点设计.docVIP

洛阳龙门钟楼结构模型分析和关键节点 设计 吴翔艳刘锋吴琨贾俊明 中国建筑西北设计研宄院有限公司 结合洛阳龙门钟楼建筑特点，提出了一种针对传统风格建筑檐门柱收分的结构 构造做法，即方钢管混凝土柱下接钢筋混凝土柱收分节点构造。通过3种不同的 计算模型分析及整体指标对比，结果表明方钢管混凝土柱连接属性介于铰接与 刚接之间，属于半刚性连接。结构简化计算时整体控制指标应取铰接、刚接计算 假定的中间值。根据《钢管混凝土结构技术规范》(GB 50936—2014)相关要求 验算该构造下方钢管混凝土柱在单一受力状态和复杂应力状态的承载力，结果 表明方钢管混凝土柱满足各项受力状态下的性能要求。通过整体与局部节点分析 可知，该构造节点安全可靠，可供类似项目设计参考。 关键词： 待统风格建筑;结构模型;节点设计;节点构造; 吴翔艳，，工程师，Email:toncy2031@sina. com0 基金：中建股份科技研发课题(CSCEC-2012-Z-16) Structural model analysis and key joint design of Luoyang Longmen Bell Tower Wu Xiangyan Liu Feng Wu Kun Jia Junming Che Shunli China Northwest Architectural Design and Research Institute Co., Ltd.; Abstract： According to building characteristics of Luoyang Longmen Bell Tower, a structural construction was proposed for cornice column joint of traditional style building, that is joint structure of concrete-filled square steel tubular column lower connected with reinforced concrete column. Through the analysis of three different calculation models and the overall index comparison， the results show that the connection property of the column of concrete-filled square steel tubular short column is between the hinge and rigid connection, and it belongs to semi-rigid connection. Tn the structural simplification calculation, the overall control index should take the intermediate value of the calculation assumptions of hinge and rigid connections. According to the relevant requirements of Technical code for concrete filled steel tubular structures ( GB 50936—2014) , the bearing capacity of concrete-filled square steel tubular columns under single stress state and complex stress state was verified. The results show that the concrete-filled square steel tubular columns meet the performance requirements under different stress states. Through the analysis of the whole and local joints, it is verified that the constructed joint is safe and reliable, and it can be used as reference for similar project design. Keyword： traditional style building; structural model; jo