勾结参数对涤纶长丝强力的影响-丝绸.PDFVIP

Vol.49 第49卷 No.01, Jan. 2012 2012年01月 第01期 研究与技术 勾结参数对涤纶长丝强力的影响 张才前 (绍兴文理学院 元培学院，浙江 绍兴 32000) 摘要：使用双立柱电子万能材料试验机，选择4个不同的勾结位置、4种不同的拉伸速度，设定3种夹持距离，对4种涤纶FDY长丝的 勾结断裂强力和伸长率进行测试。结果表明：长丝未勾结的强力和断裂伸长率之比比勾结状态下的大，勾结位置越偏离中心位置， 强力越大，而勾结位置对勾结断裂伸长率影响不明显；夹持距离在00 mm到500 mm，长丝勾结后强力和断裂伸长率遵循“弱环定 律”；随着长丝纤度的增加，强力呈逐渐递增趋势，而断裂伸长率随纤度变化不明显。 关键词：勾结参数；长丝；勾结强力；断裂伸长率 中图分类号：TS02.522 文献标志码：A 文章编号：00-7003(202)0-0027-03 Influence of hook parameters on the strength of polyester filament ZHANG Cai-qian Yuanpei College of Shaoxing University, Shaoxing 312000, China ( ) Abstract: The hook strength and breaking elongation of four kinds of polyester filament were tested with double-column electronic universal material testing machine. The hook testing parameter includes: four hook positions, four stretching speeds and three clamp distances. Conclusions are as follows: the strength of filament becomes smaller when the filament was hooked; the more off center of hook position, the hook strength are greater, while the hook position has little impact with elongation ratio; the hook strength and breaking elongation keep with weak laws when the clamp distances range from 100mm to 500mm; at last along with the increase of thread density of filament, the hook strength increases gradually, while the elongation at break with thread density change is not obvious. Key Words: Hook parameters; Filament; Hook strength; Breaking elongation 纱线在生产、加工及使用过程中不可避免会发生 少[7-8]。而纱线实际弯曲过程比较复杂多变，因此探 弯曲，而勾结强力则