[信息与通信]高可靠性网络设计.ppt

* * * Cisco Corporate Quality’s Mean Time Between Failure (MTBF) Database contains such data as predicted MTTF for every product/part deployed in the field. The predicted MTBF number is calculated based on the Telcordia (formerly Bellcore) “Parts Count Method.” Individual device failure rates are taken from the latest issue of the Telcordia specification TR-332 tables. Recommended by the Corporate Quality, the final predicted MTBF value is 2X this calculated result, based upon Ciscos historical experience from field data. The MTBF Database also contains the field data such as install base, operation hours, demonstrated Mean Time Between Replacement (MTBR), Returned Material Authorizations (RMA), No Problem Found (NPF) Rate, and derived field MTTF. Since some of the field data are insignificant due to limited install base and short operation time, the IP RAN project has decided to use the predicted MTTF numbers in general. * The longer the software stays, the more bugs will be fixed, and the higher the reliability it will yield. The IOS HA Initiatives has been a corporate-wise effort to develop and improve IOS HA features for many products. For details, see /Eng/IOS/IOS_Tech/High_Avail_Pgm/ * The longer the software stays, the more bugs will be fixed, and the higher the reliability it will yield. The IOS HA Initiatives has been a corporate-wise effort to develop and improve IOS HA features for many products. For details, see /Eng/IOS/IOS_Tech/High_Avail_Pgm/ * The longer the software stays, the more bugs will be fixed, and the higher the reliability it will yield. The IOS HA Initiatives has been a corporate-wise effort to develop and improve IOS HA features for many products. For details, see /Eng/IOS/IOS_Tech/High_Avail_Pgm/ * * * * * * * * * Comparison Analysis Edge is the weak point (single point of failure). There is little difference between 4-nodes core and 2-nodes core in terms of network availability. Introducing dual RPs (with SSO/NSF) at the edge