【论文资料】电磁铁厂家浅谈电磁铁简易的制作方法.pptx

电磁铁厂家浅谈电磁铁简易的制作方法 Method for making manufacturers electromagnet of electromagnet simple 首先准备材料：铜丝线，一个铁钉或者铁棒，一节电池 Fi;rst prepare materials: copper wires, a nail or iron rod, a battery 一、先绕线圈，把钉子铁棒上饶满，大概在20 圈左右，从铁 棒的一端开始,向另一端饶线(单股铜线),线的样子跟弹簧一样;饶到另一端后,铜线的两端通上直流电就可以了。 One, the first coil, nail bar Shangrao, probably in about 20 laps from the end, started iron rod, to;the other end Rao line (single strand copper wires), line like a spring like Rao to the otherend, both ends of the wire on the DC;can be. 二、然后把刚才绕好的铜丝线两天分别接在电池一端和开关那里，接好后我们就实验一下。 把接通电源的开关按下去，接通电源，然后把钉子(这里已经变成电磁铁了)放在大头 针或者一些能吸的贴东西上面，看看是不是被吸附过来了，如果你的电池比较小;，可能看出 来的效果不怎么明显，那么我们把指南针拿出来试试。肯定会看出来效果的。 Two, then just around the copperline two days respectively connected to the batter;y end and a switch there, then we will test. The switch on the power of the press, the power supply is switched on, and then put t;he nail (here has become the electromagnet) is put on top of theneedle or some can absorb the paste things, have a look Is it ri;ght? Absorbed over, if your battery is relatively small, can see to effect is not how Me Mingxian, so we put the compass out try;. Will see the effect of. 这是最简单的一种电磁铁了，大家应该学会了，原理就是把电转为磁力。复杂一点的就要按电磁铁分类，看你要做哪一类了。不同类别的电磁铁所用材料、制作 工艺完全不同。要磁性强的话，最好用U形软铁芯。在两个脚上;分别以顺，逆时针方向紧密绕上膝包线。另外最好用大功率的蓄电池。 This is a kind of electromagnet is the most simple, everyone should learn, the principle is t;hat the electric to magnetic. A bitmore complex to the electromagnet classification, will you do what kind. The electromagnet of;different types of materials used, manufacturing process is completely different. To magnetic strong words, preferably U shaped i;ron core. At two feet inCIS, anti clockwise close around the knee envelope. In addition the best battery with high power.;Manufacturers electromagnet, electromagnetic valve manufacturers, DC electromagnet - Guangzhou Delong Electronics Co., Ltd. (;);zasqfgq 电磁铁厂家