霍尼韦尔 honeywell WEBS电源盘安装指南.pdfVIP

SEC-ENC-H-1/NP SEC-ENC-H-2/NP INSTALLATION INSTRUCTIONS This document covers the mounting and wiring of the medium and large-sized WEBs-AX Security Enclosures used for housing the Security (SEC-H-201/600) controller and/or its expansion modules. It assumes that you are an engineer, technician, or service person who is performing access system design or installation. Instructions apply to the following enclosure models: Models Description Drawing SEC-ENC-H-1 Medium-sized enclosure with single DIN rail, integral power supply, tamper switch, key lock, and capacity for two user- supplied 12V sealed lead-acid backup batteries. Accommodates the SEC-H-201/600 controller or 2 SEC-H- R2R modules, or one SEC-H-RIO module. SEC-ENC-H-1NP Medium-sized enclosure with single DIN rail, tamper switch, and key lock. Accommodates the SEC-H-201/600 controller and 1 SEC-H- R2R modules or 3 SEC-H-R2R modules, or one SEC-H-RIO module and one SEC-H-R2R module. SEC-ENC-H-2 Large-sized enclosure with two (2) DIN rails, integral power supply, tamper switch, key lock, and capacity for two user- supplied 12V sealed lead-acid backup batteries. Accommodates the SEC-H-201/600 controller with up to 4 SEC-H-R2R modules, or the SEC-H-201/600 controller with up to 2 SEC-H-RIO modules, or many other possible combinations. SEC-ENC-H-2NP Large-sized enclosure with two (2) DIN rails, tamper switch, and key lock.