MP-8811P前置放大器中英文说明书-复制.docVIP

MP-8811P Pre Amplifier  OWNER’S MANUAL Before operating, please read this manual completely. FEATURES 5 microphone inputs, 3 auxiliary inputs, 2 priority inputs, 4 outputs. Muting function. Individual volume control. Bass and Treble tone control. A five-element LED level meter is provided for quick and easy visual monitoring of output level. Manual chime out. Left blank for memo FRONT PANEL ⑧ ① Power switch (1 is power on and the “power LED” is on ). ② Bass control. ③ Treble control. ⑤ MIC 5, 4, 3, 2, 1 volume control. ⑥ MIC 1 input. ⑦ Chime button  ④ AUX 3, 2, 1 volume control. ⑧ LED output level meter REAR PANEL ① Chime volume ② MIC 2, 3, 4, 5 inputs. ③ EMC 1, 2 inputs. ⑤ OUTPUT jacks. ⑥ AC FUSE. ⑦ AC power cord.  ④ AUX 1, 2, 3 inputs. MUTING CHIME FUNCTION MIC input 2, 3, 4, 5 and AUX input 1, 2, 3 automatically muted by EMC input 1, 2. (EMC 1or 2 input overrides the MIC2, 3, 4, 5 and AUX 1, 2, 3 signals). MIC input 2, 3, 4, 5, AUX input 1, 2, 3 and EMC 1, 2 are automatically muted by MIC1 input (MIC1 input overrides the other input signals). Press chime button once for issuing a string of prompt chime before using MIC to broadcast. Note: Prompt chime is different to in time chime from MP-9914. The latter sounds automatically according to presetting. CONNECTIONS PRIORITY MIC SPECIFICATIONS Inputs Mic 1, 2, 3, 4, 5; 2.5 mV, unbalanced Aux 1, 2, 3 ; 250 mV, unbalanced output 1V Frequency response 20 Hz---20 kHz Signal/ noise ratio Mic input : 80 dB Aux input : 85 dB Tone Bass : ?10dB at 100 Hz Treble : ?10dB at 10 kHz Chime Melody : ?d(1－3－5－ì－) ” Power Requirement AC 220 –240 V / 50～60 Hz Dimensions 485×88×375 mm Specifications are subject to be changed without notice. CAUTION When the “Power switcher”is off, please pull out the power cord