信道编码的研究毕业论文推荐.docVIP

信道编码的研究 摘　　要 如今的时代，科技经济都在飞速的发展。通信技术的发展使得其应用领域也越来越广。人们对无线信道数据的可靠传输要求越来越高。无线信道的时变特点，有限的带宽以及易受干扰等特点使得这个要求非常具有挑战。想要实现这个目标，系统的可靠性和有效性必须考虑进去。然而，众所周知信源编码就是尽量减少自身的冗余来增加系统的有效性。信道编码恰恰相反，它是通过增加序列冗余来增加系统的可靠性。实际应用中，信息传输介质相当复杂，极易造成信号的失真。为了改善信号的传输质量，应当使得在一定的编码效率之下能够把误比特率降到最低。此时信道编码技术就是一种可以把误比特率降低而同时信号传输质量又可以得到改善的一种技术。 在本论文中讲解到了通信系统的基本框架，对目前的一些编码技术比如循环码，卷积码，Turbo码，LDPC码等进行了相关介绍。针对LDPC码还做出了改进和Matlab方针，使得通信无论在简单还是相对复杂的环境之下，都可以可靠高效的传输。 关键词：信道编码；通信；分组码；循环码；Turbo码；LDPC码 Channel Coding Research ABSTRACT Todays era, science and technology are in rapid economic development. The development of communication technology makes its application field is becoming more and more widely. The wireless channel and reliable data transmission demand is higher and higher. Time-varying characteristics of wireless channel, limited bandwidth and susceptible to interference characteristics make this requirement is very challenging. To achieve this goal, system reliability and validity must be taken into account. But we all know that source code is to reduce their redundancy to increase the effectiveness of the system. Channel coding on the contrary, it is by increasing the sequence redundancy to increase the reliability of the system. In practical application, the information transmission medium is very complex, easy to cause the distortion of the signal. In order to improve signal transmission quality, shall be made under a certain coding efficiency can reduce the bit error rate to a minimum. The channel coding technology is a kind of can reduce the bit error rate and signal transmission quality and can be improved at the same time a kind of technology. In this thesis explain the basic framework of communication system，the current some coding techniques are introduced. For LDPC code is also made improvement and Matlab, make no matter communication under the environment of relative simple or complex, can be a reliable and efficient transmission. Key Words:Channel coding;Communication;Block code;Cyclic co