SERVO-I service manual-高解析度版-1-2.pdf

Description of functions SERVO-i Ventilator System PC 1784 Expiratory channel Regulation of a constant Inspiratory flow during expiration time: The desired constant Inspiratory flow Functional Main Blocks diagram marking: F. value is the default Bias flow value (see User’s The main block Expiratory channel comprises manual). microprocessor control to achieve measurement of This desired constant Inspiratory flow value is used expiratory flow. The output signal Exp. Flow is used to generate the flow reference signals Insp Flow Ref 1 in the main block Control. and Insp Flow Ref 2 with the same relation and same Electronics including microprocessor (µP) for handling as described above under Regulation of handling of: Inspiratory flow… except this occurs during expiration time. • All electronic connections to and from the Expiratory Section functions. The electronics controlling the optional Servo Ultra Nebulizer is located on PC 1771 Control. • Measurement of airway pressures in both Inspiratory Section and Expiratory Section. Includes an ID PROM. The ID information can be read by the Servo-i System. • Control of the Safety Valve functions in the 3 Inspiratory Section. Note: The System SW must be re-installed if PC