H3CNE实验题课件.ppt

VLAN与链路聚合 单臂路由方式实现VLAN间互通 广域网协议（PPP） 广域网协议（FR） 动态路由协议（RIP） 动态路由协议（OSPF单区域） 动态路由协议（OSPF多区域） NAT地址转换 网络可靠性（VRRP） RTA配置 1、IP地址配置 [RTA] interface S2/0 [RTA-Serial2/0]ip address 8 [RTA-Serial2/0]interface e0/0 [RTA-Ethernet0/0]ip address 8 [RTA-Ethernet0/0]interface e0/1 [RTA-Ethernet0/1]ip address 8 [RTA-Ethernet0/1]quit 2、备份中心的配置 [RTA] interface S2/0 [RTA-Serial2/0]standby interface e0/0 3、PPP的PAP验证（主） [RTA]local-user h3c [RTA-luser-h3c]password simple huawei [RTA-luser-h3c]service-type ppp [RTA] interface S2/0 [RTA-Serial2/0]link-protocol ppp [RTA-Serial2/0]ip address 8 [RTA-Serial2/0]ppp authentication-mode pap //在接口开启PAP验证 4、NAT [RTA]acl number 3000 [RTA-acl-3000]rule deny tcp source 0 destination detination-port eq 80 [RTA-acl-3000]rule permit ip source destination any [RTA-acl-3000]interface s2/0 [RTA-Serial2/0]nat outbound 3000 [RTA-Serial2/0]interface e0/0 [RTA-Ethernet0/0]nat outbound 3000 5、缺省路由 [RTA] ip route [RTA] ip route RTB配置 1、IP地址配置 [RTA] interface S1/0 [RTA-Serial1/0]ip address 8 [RTA-Serial1/0]interface S2/0 [RTA-Serial2/0]ip address 8 [RTA-Serial2/0]interface e0/0 [RTA-Ethernet0/0]ip address 8 [RTA-Ethernet0/0]interface e0/1 [RTA-Ethernet0/1]ip address 8 [RTA-Ethernet0/1]quit 2、PPP的PAP验证（被） [RTB] interface S2/0 [RTB-Serial2/0]link-protocol ppp [RTB-Serial2/0]ppp pap local-user h3c password simple huawei 3、FR（DcE端） [RTA] interface S1/0 [RTA-Serial1/0]link-protocol fr [RTA-Serial1/0]fr interface-type dce [RTA-Serial1/0]fr dlci 100 [RTA-Serial1/0]fr map ip 100 4、OSPF [RTB] router id [RTB]ospf [RTB-ospf-1]area 0 [RTB-ospf-1-area ]network 55 [RTB-ospf-1-area ]network 0 255.255.255 [RTB-ospf-1-area ]network 0 255.255.255 [RTB-ospf-1-area ]network 0 255.255.255 RTC配置 1、IP地址配置 [RTC] interface S1/0 [RTC-Serial1/0]ip address 8 [RTC-Serial1/0]interface e0/0 [RTC-Ethernet0/0]ip address 8 [RTC-Ethernet0/0]quit 2、FR配置（DTE端） [RTC-Serial1/0]link-protocol fr [RTC-Serial1/0]fr map ip 100 3、OSPF [RTC] router id [RTC]ospf [RTC