Gasket-China-ENCN板式换热器垫片材质.pptVIP

? Alfa Laval ? Alfa Laval Gasket Agenda Rubber materials used by Alfa Laval 阿法拉伐胶垫 Lifetime 寿命 Material selection 材料选择 Construction 胶垫构造 Manufacturing 制造 Materials - Classification of rubber types胶垫材料分类 Materials - Alfa Laval NBR types Nitrile（丁腈橡胶） Inexpensive standard material up to 140 °C NBRP (performance) up to 140 °C NBRB (base) inexpensive for lower temperatures Materials - NBR usage 用途 All NBRP gaskets can be glued 所有NBRP可用粘接 Largest used material group (no of gaskets) 用量最多 Polar polymer Oil resistant material能抵抗极性物质如油 Suitable for most fuels and lubricating oils.用于燃料油和润滑油 Many types of heat transfer oils are unsuitable很多导热油不合适 Suitable in steam up to 140 °C (NBRP) 蒸气应用达到140度 Unsuitable in polar organic substances有机溶液不合适 Poor outdoor resistance 抗户外老化较差 Materials - Alfa Laval EPDM types EPDM（三元乙丙） Standard material up to 160 °C 标准材料160度 Standard EPDM qualities 标准EPDM EPDM for glued gaskets (“Crushing resistant” 抗挤压) EPDMC for clip-on gaskets at high temperature EPDMCT as above but for thin gaskets in models with low pressing depth (1.5-3 mm) EPDMP for high temperature steam applications (180 °C) Materials – EPDM usage用途 Unsuitable in all type of hydrocarbons 碳氢化合物 (e.g. crude oil原油, heat transfer oils of hydrocarbon type, hydrocarbon solvents, lubricating oils, paraffin石蜡) Should not be used in vegetable oils 不能用于植物油 Good steam resistance – high temperature 高温蒸气 Relatively good acid resitance 用于酸类 Relatively good in oxidizing fluids 用于氧化类溶剂 Good outdoor performance 抗户外老化 Material - Alfa Laval FKM-types FKM, Fluorocarbon rubber 氟橡胶 Used for aggressive chemical compounds 用于腐蚀性很将的化学物质 Sulphuric acid 硫酸 Aromatic organic compounds 芳香类有机物 Chlorinated organic compounds 氯化有机物 Three different qualities used 三种品质 FKMG FKMS FKMT Material - FKM cont. 氟橡胶介绍 FKMG is based on Viton GF300 for increased chemical resistance － FKMG是在VitonGG300基础上的可耐大部分化工物质 FKMS is based on a high fluorinated polymer and filled with PTFE for maximum chemical resistance